| Model: | JAT HM9001 |
|---|---|
| Brand: | access-controller |
| Origin: | Made In China |
| Category: | Security & Protection / Access Control System |
| Label: | iCLASS reader , iClass compatible , HID iclass reader |
| Price: |
-
|
| Min. Order: | - |
| Live Chat: | Last Online:24 Apr, 2015 |
HM9001 is compatible HID iCLASS card CSN reader, it is a solution that one reader can read the most common RFID card and proximity card with ISO1443A and ISO 15693 protocol. It reads all HID standard iCLASS card serial number and transmits it to the access control system using the common Wiegand interface. And it also reads mifare IC card and I-code , Tag-it RFID card CSN number. It is with wide input power range from 5 to16VDC at 100mA( A linear regulator is recommended ) and reading distance is from 5 to 10cm; HM9001 is with external LED and buzzer control function, and has one special hold control line which allow access controller host stop HM9001 from detecting card.
Red : Vin
Black: Gnd
Green: Data0
White: Data1
Brown: LED
Blue: buzzer
Yellow: Hold
| waterproof, Full potting for outdoor access control system | |
| support card: HID iclass card serial number, Mifare smart IC card 14443A, Desfire, I-code, Hi-tag | |
| Power requirements | 5-16VDC at 150 mA, A linear regulator is recommended |
| interface | wiegand |
| Reader range | 5-10cm |
| Frequency | 13.56MHz |
| Operation temperature | -30 C to +60 C |
| operation humidity | 5%-95% relative humidity non-condensing |
| Audio/Visual Indication | Green & Red and Buzzer signal output |
| Dimension | 105 x 45 x 22 ( mm ) |
| cable length | 250mm |
| Weight | 150gram |
LED function: The LED color is normally RED. It starts with 1 green flash on power up the reader and remains RED. When a HID iCLASS card or other RFID proximity card is presented to the reader, The LED will momentarily flash green, this indicates that iCLASS card or RFID card was read properly by the reader. When the LED control signal is activated by access controller, the LED changes to green. The LED control signal is provided by the access control panel to control the reader LED state.
Beeper Function: Power up the reader, the beeper will activate 1 time. When a HID iCLASS card or RFID proximity card is presented to the reader, a short beep will be emitted. This indicates that the card was read properly by the reader.
Buzzer control line : when it is activated by access controller, buzzer will sound continually till the line is released to high by access controller or access panel.
