| Model: | HM6005 |
|---|---|
| Brand: | access-controller |
| Origin: | Made In China |
| Category: | Security & Protection / Access Control System |
| Label: | 125K reader , EM card reader , proximity card |
| Price: |
-
|
| Min. Order: | - |
| Live Chat: | Last Online:24 Apr, 2015 |
125K compatible card reader
Introduction
HM6005 is designed with 125KHz FM modulation RFID card reader technology, it is125K compatible Proximity card reader. HM6005 reads all 125KHz proximity card serial number and transmitsthe proximity card number to the access control system using the common Wiegand interface, HM6005 can be with other OEM interface requirements in the future
Model Name: HM6005
Wiring:
Red: Power 5-16V
Black: Power ground
Green: Wiegand output D0
White: Wiegand output D1
Brown: Green LED control
Blue: Buzzer control
Yellow: Hold
Specification
| Dimension | 76*43*13mm |
| Power requirements | 5-16VDC at 100mA, A linear regulator is recommended |
| support card | All 125kHzproximity card, |
| interface | Weigand |
| Reader range | 5 - 10 cm |
| Frequency | 122-128KHz |
| Operation temperature | -30 C to +60 C |
| operation humidity | 5%-95% relative humidity non-condensing |
| Audio/Visual Indication | Green & Red and Buzzer signal output |
| Response Time | Less than 0.2 seconds |
| cable length | 250mm |
| Weight | 60gram |
LED/Buzzer function description
LED function: The LED color is normally in RED. It starts with 2 green flashes on power up proximity card reader HM6005 and remains RED. When a HID proximity card is present to the reader, The LED will momentarily flash green, this indicates that the proximity card was read properly by the reader. When the LED control signal is activated by access controller host, the LED changes to green.
Beeper Function: Power up the compatible card reader, the beeper will activate 2 times. When a proximity card is presented to the hid Proximity card reader, a short beep will be emitted. This indicates that the proximity card was read properly by the reader HM6005. When the Buzzer control signal is activate by access controller, the buzzer will sound till buzzer control line is released by the controller.
Hold function: when this line is activated by access controller HOST ,the reader will buffer one card read ( ignoring subsequent reads ) until the line is released.( high or released by access controller HOST).
