Home > Products > Industrial Supplies > Machinery > Engraving & Etching Machine

Features

 It is revolutionary new generation of fiber laser marking machine system:

1. It is characterized by small, long-life of the semiconductor module (> 500,000 hours), low power consumption (160Q), high beam quality, USB interface, which supports WIN98/2000/XP and other operating systems;

2. Unaffected by harsh environment and climate change; when the power is off, the battery and car cigarette lighter, etc. can be used to operate.

  Before the advent of optical fiber lasers, the light of the laser marking system generally comes from laser source of continuous or pulsed CO2 laser and Nd-YAG laser. Fiber laser, compared with conventional laser source, the performance is superior, the divergence angle is 1/4 of diode-pumped laser (more suitable for sophisticated, fine standard machine industry); electro-optical conversion efficiency is 1/10 of flash lamp-pumped solid laser marking machine; the average working time can be up to 100,000 hours;

3. Fiber laser is totally air-cooled, needing no refrigerator, cooling water pipes, the temperature controller and other matching equipments. The volume reduced, energy consumption decreased, so the user cost substantially lower than traditional laser marking system.

4. ETL fiber laser pulse working repetition rate is 10-100KHZ, the fiber laser of 10-20W average power output has the volume of only 58CM * 280 * 56CM, weighting 10KG. Because the laser diode is operating under voltage, optical fiber laser machine’s electro-optical efficiency can be as high as 70%. UPS power can be used to replace the drive power when the latter is power off, and the power consumption is only 160W.

Scope:

It can be used to mark and engrave all kinds of metal and some non-metallic materials, such as nylon, ABS, PVC, PES, steel, titanium, copper and so on.

Technical parameters:

Average output power: 20W

Laser wavelength: 1030-1120nm

Laser output power: 10% -100% continuously adjustable

Power supply: Single phase AC 220V/50HZ-60HZ

Electricity power: <160W

Size: 460mm * 160mm * 250mm

Total weight: <10.5KG

Focus spot size: <0.01mm

Marking speed: 30mm/30mm-300mm/300mm optional

Marking area: >800 standard characters / second

Semiconductor module life: >500,000 hours

Computer operating system: Win98/Win2000/XP

Cooling method: Built-in air-cooled

Control Interface: Standard USB

Acceptable font and document format: all fonts in WINDOWS operating system (including the language text / bar code, etc. of every country); BMP / PCX and so on with 256 gray scale image files, and DXF / PLT format for vector graphics file.