| Model: | - |
|---|---|
| Brand: | - |
| Origin: | Made In China |
| Category: | Construction & Decoration / Other Construction Materials |
| Label: | high value grouting , for reinforcement , grouting material |
| Price: |
-
|
| Min. Order: | 50000 pc |
| Live Chat: | Last Online:03 Mar, 2011 |
|
Vertical Expansion Rate (%)
|
Compressive Strength(M pa)
|
Rail spike pull-out resistance（KN）
|
||
|
4 hours
|
1 day
|
3 days
|
||
|
≥0.02
|
＞20
|
＞35
|
＞50
|
＞60
|
|
No.
|
Steps
|
Tools
|
Requirements of Construction
|
Remarks
|
|
1
|
Take out the old rail spike
|
special tools
|
1. take out the old spike
2. Cleaning the hole of the rail spike.
|
|
|
2
|
stick
|
|
||
|
3
|
Mixing
|
Container\ spoon\ bucket
|
Mix 14-16% water with the anchoring agent, mix evenly
|
Add or reduce water according to situation
|
|
4
|
Grouting
|
spoon
|
Grouting the mixed anchoring agent into the hole from the middle of the shelf of anchorage. 2cm to the top of the hole it’s better.
|
|
|
Put the rail spike
|
|
Make sure no oil stain on the spike
|
||
|
6
|
clean up
|
Stick
|
||
|
7
|
Fix the fastener
|
T- spanner
|
After anchoring (60 min), fix the fastener, screw down the nut with hand, after 120 min screw down the nut with T-spanner, 24hour screw down tightly as required
|
|
|
8
|
Change the new railroad
|
|
It will be available after 1 day curing.
|
It’s better to spray water after 1-3 days curing
|
| Payment Terms: | within 7-15days after payment |
|---|---|
