| Model: | IC F 33 |
|---|---|
| Brand: | Icom |
| Origin: | - |
| Category: | Electronics & Electricity / Telecommunication & Broadcasting / Other Communication Equipment |
| Label: | two way radio , walkie talkie , handheld transceiver |
| Price: |
-
|
| Min. Order: | 10 pc |
| Live Chat: | Last Online:03 Dec, 2011 |
Lithium-Ion battery pack
Supplied 1150mAh Li-Ion battery pack, BP-231, provides 8/9 hours* of operating time. For longer operating time, use the BP-232 which is rated for a full 15/16 hours*. Li-Ion technology has virtually no memory charging issues.
Wide frequency range and large channel capacity
The two way radio covers a wide frequency range in one version (136-174MHz). The 256 memory channel capacity with 16 memory banks allows you to divide and store a variety of ?exible channel groupings.
Small and lightweight body
The two way radio sheds size and weight compared with previous models, weighing just 285g* (including BP-231) and measuring only 53(W)×120(H)×32.5(D) mm. The aluminum die-cast chassis and polycarbonate casing combination meets MIL standard specil cations.
Built-in multi-format tone signaling
Use the built-in CTCSS, DTCS, 2-Tone, or 5-Tone to set up your own talk groups and quiet stand-by when others are talking. You can also set up selective calls to individuals or control a repeater.
8 programmable buttons to meet specific needs.
The [Red] button on the top panel can be assigned as an emergency trigger.
Alphanumeric display
The 8-character alphanumeric display shows channel, bank, tone code and scanning channel names on the display. A separate row of operational icons indicate battery, signal strength, RX/TX and other radio conditions.
Audio compander
The built-in audio compander reduces noise components and provides clear reception even in narrow band use.
Built-in voice scrambler
The two way radio includes a built-in inversion type voice scrambler in all models. When a more secure system is required, the optional voice scrambler unit UT-109 or UT-110 is available.
MDC 1200 compatible
The following selective calling and ANI features of two way radio are available with the built-in MDC signalling.
Specification
|
General |
||||||||||
|
Frequency range
|
|
|||||||||
|
Number of channels |
256 channels / 16 banks |
|||||||||
|
Channel spacing |
12.5kHz / 25kHz, 15kHz / 30kHz |
|||||||||
|
PLL channel step |
2.5kHz, 3.125kHz (VHF)
|
|||||||||
|
Antenna impedance |
50Ω |
|||||||||
|
Usable temperature range |
-30°C to +60°C; -22°F to +140°F |
|||||||||
|
Power supply requirement |
7.2V DC |
|||||||||
|
Current drain
|
|
|||||||||
|
Dimensions (with BP-23)
|
53 (W) × 120 (H) × 32.5 (D) mm;
|
|||||||||
|
Weight (approx.)
|
285g; 10.0 oz (VHF)
|
|||||||||
|
Transmitter |
|
|
Output power |
5W (VHF), 4W (UHF) |
|
Max. freq. deviation |
±5kHz (Wide)
|
|
Frequency Error |
±2.5ppm |
|
Spurious emissions |
80dB typ. (VHF)
|
|
Adjacent channel power |
70dB (Wide), 60dB (Narrow) |
|
FM Hum and Noise |
46dB typ. (Wide)
|
|
Audio harmonic distortion |
3% typ. (AF 1kHz, 40% deviation) |
|
Modulation limiting |
60-100% of max. deviation |
|
Ext. Microphone connector |
3-conductor 2.5 (d) mm (1/10") / 2.2kΩ |
|
Receiver |
|
|
Intermediate freq. 1st 2nd |
|
|
Sensitivity |
0.25µV typ. (at 12dB SINAD) |
|
Squelch sensitivity |
0.25µV typ. (at threshold) |
|
Adjacent channel selectivity |
75dB typ. (Wide)
|
|
Spurious response |
70dB |
|
Intermodulation |
74dB typ. |
|
Hum and noise ratio |
45dB typ. (Wide)
|
|
Audio output power |
500mW (at 5% distortion with an 8Ω load) |
|
Ext. speaker connector |
2-conductor 3.5 (d) mm (1/8") / 8Ω |
