| Model: | IC V 80E |
|---|---|
| Brand: | Icom |
| Origin: | - |
| Category: | Electronics & Electricity / Telecommunication & Broadcasting / Other Communication Equipment |
| Label: | radio transceiver , two way radio , walkie talkie |
| Price: |
-
|
| Min. Order: | 10 pc |
| Live Chat: | Last Online:03 Dec, 2011 |
Tough Construction
Icom radios are built tough, and the IC-V80/E – Icom's most economical 2M – is no exception. This military r ed rig offers water resistance and superior protection against dust and dirt (IP54). Compact, r ed and with plenty of power, the IC-V80/E is ideal for basic, on-the-go ham operations.
750mW loud audio
The radio transceiver uses the BTL (bridge-tied load) amplifier that doubles the audio output. Every ham knows that power = current × voltage. The cheap radio transceiver's BTL increases the audio output by doubling the voltage delivered to the speaker.The 36mm large speaker delivers 750mW of loud and intelligible audio*. Great for noisy environments.
Powerful 5.5W of Output Power
The radio transceiver offers a just-right mix of power and size. 5.5 watts of high power will work to get your message through. Get up to 19 hours* of operating time with the Li-ion battery pack (BP-265) or 13 hours with the Ni-MH (BP-264). All that power comes is an easy to hold and use size – not too big, not too small.
A total of 207 memory channels
The radio transciever has a total of 207 memory channels, including 200 regular channels, 6 channels, including 200 regular channels, 6 scan edges and 1 call channel. The channel name is programmable with 5 characters for easy recognition.
Built-in CTCSS/DTCS
The CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. The pocket beep alerts you when a matching tone frequency is received. The tone scan detects the subaudible tone that is used for repeater access.
Internal VOX function
The radio transceiver has internal VOX (Voice Operated Transmit) function for convenient hands-free operation with a compatible optional headset and plug adapter cable.
Specification
|
GENERAL |
|||||||||
|
Frequency range |
|
||||||||
|
Mode |
: F3E, F2D, [M] |
||||||||
|
Number of memory ch. |
: 207 (6 scan edges, 1 call) |
||||||||
|
Antenna connector |
: BNC (50 ohm) |
||||||||
|
Power supply |
: 7.2 VDC |
||||||||
|
Frequency stability |
: ±2.5 ppm -12°C to +60°C |
||||||||
|
Usable temp. range |
: -12°C to +60°C; -4°F to +140°F |
|
Dimensions
|
: 58(W) × 112(H) × 30(D) mm
|
|
Weight |
: 360g; 12.7oz (with BP-264) |
|
TRANSMITTER |
||||||||||||
|
Output power (at 7.2 V DC) |
|
|
||||||||||
|
Spurious emissions |
: Less than -60 dB |
|||||||||||
|
Max. freq. deviation |
: ± 5 kHz/ ± 2.5 kHz (Wide/Narrow) |
|||||||||||
|
RECEIVER |
|
|
Receive system |
: Double-conversion super heterodyne |
|
Intermediate frequencies |
: 1st 21.7 MHz
|
|
Sensitivity (at 12dB SINAD) |
: 0.14 µV typical |
|
Squelch sensitivity (at threshold) |
: 0.1µV typical |
|
Selectivity |
: 70/50dB (Wide/Narrow) typical |
|
Inter modulation |
: 70/65dB (Wide/Narrow) typical |
|
Spurious and Image rejection |
: 75dB typical |
|
Audio output power |
: 750 mW typ. with an 16 ohm load |
|
Ext SP connector |
: 3-conductor 3.5 (d) mm (1/8")/8 ohm |
