Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

Port type and quantity 6 x 10/100BASE-TX, TP cable, RJ45 socket, automatic crossover, automatic negotiation, automatic polarity, 2 x 100BASE-FX, SM cable, SC socket, more interface power/signal contacts 1 x plug-in terminal block, 3-pin network scale - cable length twisted pair (TP) 0-100 meters single-mode fiber (SM) 9/125 µ m 0-30 km (1300 nm link budget=0-16 db; A=0.4 dB/km); BLP=3.5 ps/(nm * km)) network scale - maximum current consumption of any power source requiring 24 V DC in cascaded linear/star topology. 160mAh working voltage 12/24V DC (9.6-32V DC) maximum energy consumption. 3.8 watts of power output in BTU (IT)/h 12.8 diagnostic function diagnostic function LED (power, link status, data, data rate) environmental conditions average time between failures 1.162.135 hours (Telcordia) operating temperature 0-+60 ℃ storage/transportation temperature -40-+70 ℃ relative humidity (non condensing) 10-95% mechanical construction dimensions (width x height x depth) 45 x 110 x 88 mm (without terminal blocks) weight 230 grams installation rail protection level IP30 plastic mechanical stability IEC 60068-2-6 vibration 3.5 millimeters, 5-8.4 Hz, 10 cycles, 1 octave band/minute 1 g, 8.4-150 Hz, 10 cycles, 1 octave band/minute IEC 600 68-2-27 Impact 15 g, 11 ms duration, 18 shocks EMC interference immunity EN 61000-4-2 electrostatic discharge (ESD) 4 kV contact discharge, 8 kV air discharge EN 61000-4-3 electromagnetic field 10V/m (80 – 3000 MHz) EN 61000-4-4 fast transients (burst) 2kV power line; 4kV data line (SL-40-08T only 2kV data line) EN 61000-4-5 surge voltage power line: 2kV (line/earth), 1kV (line/line); 1kV data line EN 61000-4-6 Conducted Immunity 10V (150 kHz - 80 MHz) EMC emitted immunity EN 55022 EN 55032 Class A FCC CFR47 Part 15 FCC 47CFR Part 15, Class A Approvals Basis Standard CE, FCC, EN61131