Home > Products > Metallurgy , Mining & Energy > New Energy > Solar Energy

Model: PS-1000

Here's the 1000 Watt Pure Sine Wave Low Frequency Inverter with built-in battery charger. This inverter charger is perfect for small-sized industrial applications that depend upon power being available even under heavy load. This heavy-duty inverter charger is ready to go wherever you need it to: off-grid home back up power, solar systems, business back-up power, campsites, tailgating parties or any recreational locations. Use this product to power your essential household appliances during a power outage emergency. This inverter is also great in a smaller RV or boat. If 1000 watts is not enough power, check out our full line of low frequency inverter chargers available in 12, 24 & 48 volt versions.

This Pass power inverter charger is capable of accepting any source of 230v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension chord pl ed into your wall outlet at home. This inverter charger is capable of a 3000 watt surge for 20 seconds and can run at 1000 watts continuously.

The most sought-after capability this unit has is its direct connect terminal block, which allows a 300 percent surge capacity. When using the terminal block, this inverter peaks at 3000 watts with the power to run most-all tools and appliances with high startup surges. This inverter will never completely drain your batteries as it's low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection.

With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.

An optional wired remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite.

Optional Features:  
* Remote on/off switch with LCD display screen for  
aims pure sine inverter chargers - The LCD display  
screen monitors battery voltage, AC input voltage, AC  
output voltage, output frequency and output load  
percentage etc. The remote can be flush mounted into  
a dash, job box or anywhere for quick access to key  
information.  
* Auto generator start - The inverter can be customized  
to start-up a generator when the battery voltage goes  
low.    

Automatic Transfer Switch:
* This inverter comes installed with an automatic
transfer switch which will quickly transfer you to back
up power in case of a power outage without you having
to flip a switch. (10 ms max transfer time)
* When utility AC power cuts off (or falls out of
acceptable range), the transfer relay is de-energized
and the load is automatically transferred to Inverter
mode. Once the qualified AC power is restored the
relay is re-energized and the load is automatically
reconnected to AC bypass mode.

Battery Charger:  
* The 1000Watt 24VDC  
Pure Sine Inverter Charger  
Max 3000W is equipped with a  
powerful 4-step smart charger  
capable of charging at 20Amps  
* The built in battery selector for  
this inverter works with Gel USA.  
AGM 1, AGM 2, Sealed Lead  
Acid, Gel EURO, and Open Lead  
Acid battery types etc.

Specifications for PS-1000 24volt dc to 230volt ac 

Inverter Output Specifications:

Continuous Output Power: 1000 Watts

Surge Rating: 3000 Watts 

Output Waveform: Pure Sine/Same as input (Bypass Mode)

Output voltage: 230VAC±5%

Power factor:   0.1~1

Nominal Efficiency: >88% (Peak)

Line Mode Efficiency: >95%

Output Frequency: 50Hz +/- 0.5Hz / 60Hz +/- 0.5Hz

Typical Transfer Time: 8ms (Max)

Bypass Breaker - 20 amps

THD: < 5% 

Ambient operating temperature: -4°F to 122°F (-20°C to 50°C)

Input Specifications

Nominal Input Voltage: 24.0Vdc

DC Input voltage range: 20.0~31.0v

Minimum Start Voltage: 20.0Vdc

Low Battery Alarm: 21.0±0.6VDC

Low Battery shutoff: 20.0±0.6VDC

Low battery Trip: 20.0Vdc-21.0Vdc

High Voltage Alarm: 31.0Vdc

High Voltage shutoff: 32.0±0.6VDC

Idle Consumption: 26.5 watts

Power Saver Mode Idle Consumption: 10.0 watts

Charger Specifications

Output voltage: Depends on battery Type

Charger Rate: 20A

Over Charge Protection Shutdown 31.4Volt

Selectable Charge setting based on battery type

Adjustable charge current off--40%/60%/80%/100%

Four Stage Smart Charger

Transfer Switch Specifications

30 amp auotmatic transfer switch

8 ms (max)

Dimensions:

Unit Weight: 37.1 lbs.( 16.8kgs)

Unit Size L x W x H: 18.83 x 8.67 x 7.10 inches (48x22x18cm)

Shipping Weight: 44.13 lbs.(20kgs)

Shipping L x W x H 23..62 x 13.39 x 12.99 inches (600*340*330mm)