Home > Products > Metallurgy , Mining & Energy > New Energy > Solar Energy

Model: PS-2000W-48v-230v

· 2000 Watt continuous pure sine power

· 6000 watt peak power 

· Built in 30A smart battery charger with 7 selectable battery type settings

· Auto gen start feature.Multi Stage Smart charger 20 Amp

· Marine and industrial grade

Overview

PS-2000w inverter is a combination of an inverter, battery charger and AC auto-transfer switch.

This is an industrial-grade unit with the ability to withstand surges of up to 6000 watts, 

and it achieves this by virtue of its direct connect terminal block.

The 2000 watt 48 volt low frequency Pass Power inverter charger transforms DC (direct current) power, 

produced by solar panels and stored by batteries, into AC (alternating current) electricity that can be used to run most all tools and appliances. This inverter also has a built in AC-to-DC battery converter charger, which allows users to recharge their battery bank from an AC source such as a fuel-powered generator, shore power or a regular outlet at home.

Use this product for renewable solar, off-grid home or business, mobile and emergency backup power applications anywhere that uses 220 or 230 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.

It boasts an average 10 millisecond transfer time with the built-in transfer switch. This is an awesome feature for use with backup power applications, as it makes the inverter a nearly uninterrupted power supply (UPS) when combined with a battery bank.

This inverter also features a battery-type selector, which helps user regulate the voltage going into the battery bank. This capability can be a big money-saver since treating the battery bank properly will maximize its lifespan.

Use this inverter to power tools on a work truck, as it will run most electric chainsaws, portable grinders, shop vacs, and more.  Or use it to power appliances in your RV, as it won't produce any annoying noise or pollution.  

Check out the 6000 watt low frequency inverter charger for a comparable unit that can handle the startup surges (up to 15,000 watts for 20 seconds) of tools with larger electrical requirements, such as an air compressor.

A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (when compared to modified sine wave units) produced during the DC-to-AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency. It also provides a quieter, nearly inaudible performance.

The inverter also has conformal-coated (marine-coated) boards, making it marine-grade and resistant to dust and/or water vapor that travel through the air and could otherwise be damaging to the unit. This feature is great for boating applications, like powering a stereo system, for instance.

As with all our inverters, the PS-2000-48V-230V  is covered under a one year warranty and free technical support. This inverter is also available in 12 and 24 volt models. 

Product Features for PS-2000

2000 watt low frequency inverter

6000 watt surge 300% surge capability

DC input and Ac output totally isolated design

High efficiency 88%--90%

Inverter power saving mode

AC/Battery Priority Selector

Terminal Block

Multi Stage Smart charger 20 Amp
Remote LED display and the RJ11 standard interface available
8msec typical transfer time
Selectable 25W power save mode (hibernation)
7 battery type settings for charger

Containing 4-step charging modes, charging current automatic adjustment

Multiple protection functions over-current, overload, output short circuit protection etc.

Optional Features:  
* Remote on/off switch with LCD display screen for  
aims pure sine inverter chargers - The LCD display  
screen monitors battery voltage, AC input voltage, AC  
output voltage, output frequency and output load  
percentage etc. The remote can be flush mounted into  
a dash, job box or anywhere for quick access to key  
information.  
* Auto generator start - The inverter can be customized  
to start-up a generator when the battery voltage goes  
low.  

Automatic Transfer Switch:  
* This inverter comes installed with an automatic  
transfer switch which will quickly transfer you to back  
up power in case of a power outage without you having  
to flip a switch. (10 ms max transfer time)  
* When utility AC power cuts off (or falls out of  
acceptable range), the transfer relay is de-energized  
and the load is automatically transferred to Inverter  
mode. Once the qualified AC power is restored the  
relay is re-energized and the load is automatically  
reconnected to AC bypass mode.   

Battery Charger:  
* The 2000Watt 48VDC  
Pure Sine Inverter Charger  
Max 6000W is equipped with a  
powerful 4-step smart charger  
capable of charging at 50Amps  
* The built in battery selector for  
this inverter works with Gel USA.  
AGM 1, AGM 2, Sealed Lead  
Acid, Gel EURO, and Open Lead  
Acid battery types etc.

Inverter Output Specifications:

Continuous Output Power: 2000 Watts

Surge Rating: 6000 Watts

Output Waveform: Pure Sine/Same as input (Bypass Mode)

Output voltage: 230VAC±3%

AC Input voltage range: 190~245VAC

Power factor:   0.1~1

Nominal Efficiency: >88% (Peak)

Line Mode Efficiency: >95%

Output Frequency: 50Hz +/- 0.5Hz / 60Hz +/- 0.5Hz

Typical Transfer Time: 10ms (Max)

THD: < 5% 

Ambient operating temperature: -4°F to 122°F (-20°C to 50°C)

Input Specifications

Nominal Input Voltage: 48.0Vdc

Minimum Start Voltage: 40.0Vdc

Low Battery Alarm: 41.0±1.2VDC

Low Battery shutoff: 40.0±1.2VDC

Low battery Trip: 40.0Vdc-42.0Vdc

High Voltage Alarm and Shutoff: 64.0±1.2VDC

Idle Consumption: 28 watts

Power Saver Mode Idle Consumption: 10.0 watts

Charger Specifications

Output voltage: Depends on battery Type

Charger Rate:20A

Over Charge Protection Shutdown 62.8V

Selectable Charge setting based on battery type

Adjustable charge current off-40%/60%/80%100%

Four Stage Smart Charger

Transfer Switch Specifications

30 amp auotmatic transfer switch

8 ms (max)

Dimensions 

Unit Weight: 42 lbs.(19kgs)

Unit Size L x W x H: 18.83 x 8.67 x 7.10 inches (48x22x18cm)

Shipping Weight: 53 lbs.(24kgs)

Shipping L x W x H : 23.62 x 13.39 x 12.99 inches (60*34*33cm)