|Origin:||Made In China|
|Category:||Industrial Supplies / Mining Machine|
|Label:||copper mining equipm , flotation machine , copper mining equipm|
|Min. Order:||1 set|
|Live Chat:||Last Online:19 Nov, 2018|
Flotation is mainly for solid-liquid or liquid-liquid separation. Large sum of micro bubbles produced by disso ing and releasing system adhere to solid or liquid particles with same density as waste water to make the whole float to the surface thus achieve the aim of solid-liquid or liquid-liquid separation.
1.It can be widely used in the beneficiation of non ferrous metals, black metals and nonmetals.It is suitable for the roughing and scavenging of the large and middle dressing plants.
2.Mechanical agitating, self air- inflation and self slurry absorbing.Constitute a flotation unit with flotation cell to be the absorbing tank of each process.
(1) After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.
(2) When the impeller of the lead zinc flotation cells begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.
(3) As a result of the cenrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the coal particle and forms mineralized discharged by the scraping tool. Finally, clean coal foam is produced by this Flotation cell.
(4) Coal particles that are not mineralized will be remixed, re-mineralized and re-separate through the recycle hole and the upper intake.
(5) The left pulp that are not sucked by the impeller enters intor the third tank after going through the process of the first tank, thus, lead zinc flotation cells runs in cycle and discharges ore pulp through the tailing box of the Flotation cell.
|Model||Effective volume||Capacity||Impeller diameter||Impeller rotating speed||Agitating motor power||Scraper motor power||Single tank weight|