| Model: | Squastar 88A# |
|---|---|
| Brand: | SKALN |
| Origin: | Made In China |
| Category: | Metallurgy , Mining & Energy / Energy / Lubricant |
| Label: | Grinding Fluid , Synthetic fluid , skaln |
| Price: |
US $80
/ drum
|
| Min. Order: | 1 drum |
| Live Chat: | Last Online:29 Dec, 2017 |
SKALN Squastar 88A Advanced Synthetic Drilling Cutting Fluid
Product Description
1. SKALN Squastar88 Series are semi-synthetic water-based, high-performance, anti-oil-resistant metalworking fluid. Designed for use in a wide range of precision metal processing applications. 88 Series has very low foam, strong self-defoaming ability. And can be used in hard and soft liquids;
2. The 88 Series is also a particularly potent coolant. It also can be maintained in harsh conditions for long working hours. And products can meet the long-life and full solubility, to avoid wasting.
Product show:
Picture 1: before mixing with water Picture 2: after mixing with water
Warm prompt: What you have seen in the picture is absolutely what it is being, you might feel somewhat of color difference subject to the monitor and the camera , please refer to the material item.
|
Recommended Dilution Ratio |
||
|
|
SKALN Squastar 88S# |
SKALN Squastar 88A# |
|
Turning, Iron cutting, Drilling |
3-5% |
5-8% |
|
Opening hole and threading |
5-8% |
7-9% |
|
Grinding |
2-4% |
4-7% |
With more and more stringent requirements of environmental protection and emission, synthetic cutting fluid has become the leading role of high-speed cutting application.
|
Synthetic Type |
Microemulsion Type |
|
No foaming substances |
Contains surface active ingredients, easy to foam |
|
Polymer instead of fat, will not degenerate smelly |
Contains mineral oils and fats smelly |
|
Working fluid transparent, visible parts |
Working fluid half or opaque, the workpiece visibility is not strong |
|
No Smell |
Oil, fat smell |
Product Parameter
|
Apperance (Concentrate) |
Light Bule Transparent Liquid |
|
Density, 20℃,g/cm3 |
8.5-9.5 |
|
IP287 Dissolution Breakpoint |
2.5 |
|
Water*Solution, 2h |
No rust |
|
Refraction Correction Factor |
1.4 |
Product Performance
1. Excellent cooling performance, suitable for non-metallic and metal fitting workpiece processing;
2. Excellent anti-oil performance, long-term working fluid to remain transparent;
3. Chip / wear debris separation and sedimentation excellent;
4. Ultra-low foam. Suitable for high-pressure high-flow processing fluid applications, widely used in Variety of stand-alone and centralized system for liquid;
5. Rust-proof performance, to meet the requirements of anti-rust process;
6. Does not contain nitrite, phenol, chlorine, phosphorus, sulfur. Moderate acid-base, minimal irritation of human skin;
7. Excellent resistance to bacteria and fungi, long service life;
8. Excellent cleaning performance, machine and workpiece clean;
Product Application
1. Suitable for aviation special aluminum, magnesium alloy, glass, ceramic, stainless steel, cast iron ferrous and yellow alloy and copper alloy cutting;
2. Products can be mixed with water and become cutting fluid by using any watered ratio.
Attention: This product is not mixed with other emulsions, semi-synthetic fluids and synthetic fluids. Because the system even contains a very small amount of decadent rash will affect the effectiveness of the new liquid.
Packaging & Shipping
FAQ
Hi, please allow me say"Thank you" firstly. Beacuse you receive my ''Thank you'' ,that mean you read our product detals off.Then please read the following information. If there is somthing that we never mentioned, please contact us immediately. And you have some doubt about the following information, also contact us. Different ways for different condition.
1.How can I get reply fastly?
Please send inquiry through Alibaba directly. The inquiry page is at the right of the page/screen or the end of the page/screen;
Before getting price,we need to know accurate product, mold number and order quantity. When you want to contact us, we will be your side. Thank you.
2.How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
If you need a small bottle samples,we can send free sample to you, you only need to pay for the freight when it arrive.
3.How long can I expect to get the sample?
You can use your own express account or prepay us if you do not have an account.after the express charge are deal with,the samples will be ready for delivery in 3-7 days and arrive in 3-5 days.But it is always depand on which country you are and others.
4.Can you do the design for us?
Yes. We have professional engineers and having rich experience in designing to meet the requirements of customer's parameters or level. DO THE DESIGN/OEM/ODM and others if you request.
5.Can you provide the MSDS(material safety data sheet) report?
The MSDS report are important for shipment(custom clearance),so we will provide this after the order confirmed or the cargo ready to ship,but at the negotiation will not be provided,please understand!
Company Information
ABOUT SKALN
SKALN Oil (Chongqing) Co.,Ltd is one of the most mature and popular brand at industrial lubricant oil field. We have provided products to most of machinery and equipment professionally in domestic. There are many kinds of different products in our factory, such as metal working fluid, cutting oil, heat transfer oil, chain oil, quenching oil, hydraulic oil, grease and so on.
After more than 20 years of accumulation and growth, we have rich experience in production. Every process is strictly monitored. Also have big warehouses and factories in Chongqing and Shanghai, near the sea port. It means product quality is in our control by us. So we have stable product performance and product price. Also easy for transportation.
Our brand and logo comes from the nature, it means we pursue environment-friendly and sustainable development. At the same time, we believe " Equality andm mutual benefit and exchange of goods needed" cooperation so that we can go further.
Contact Us
Plz be free to contact us, we are always here and waiting for you. If urgent, call me any time.
