Home > Products > Metallurgy , Mining & Energy > Energy > Lubricant

 SKALN Squastar 77 Semisynthetic Grey Cast Iron Cutting Fluid 1
  •  SKALN Squastar 77 Semisynthetic Grey Cast Iron Cutting Fluid 1

SKALN Squastar 77 Semisynthetic Grey Cast Iron Cutting Fluid

Model:Squastar 77
Brand:SKALN
Origin:Made In China
Category:Metallurgy , Mining & Energy / Energy / Lubricant
Label:cutting fluid , Semisynthetic fluid , Iron Cutting
Price: -
Min. Order:1 pc
Inquire Now Add to Basket

Member Information

Detail

SKALN Oil (Chongqing) Co.,Ltd

Free MemberChong Qin - China
Live Chat:
Last Online:29 Dec, 2017

Product Description

SKALN Squastar 77 Full Synthetic Antibacterial Cutting Fluid for Grey Cast Iron

Product Description

SKALN Squastar 77# make up by a variety of high-performance lubricants, anti-rust additives, aluminum alloy corrosion inhibitor, alkaline retention additives, bio-stabilizer and oil film enhancer. Widely adapted to aluminum alloy and ferrous metal, stainless steel car, grinding, drilling, milling and other mechanical processing technology, with excellent lubrication and anti-rust.

The product is fully synthetic with a very long service life and not easy to degenerate stench and not easy to foam, the use of this product without emissions or very little emissions in the environmental protection and long service life compared to the microemulsion type.

 

 

With the increasingly demanding on-site and emission requirements, synthetic cutting fluid has become a high-speed cutting leading role:

 

 

Synthetic type:

Microemulsion type:

Not foaming material

Contains a surface active ingredient that is easy to foam

High-molecular-weight polymer instead of the grease not easy go bad and have terrible smell

With the grease which easy go bad and have terrible smell

The working fluid is transparent and woke piece have strong visible

Thefl uid are turbidity and not clear

Oil-free odorless

Oil and fat smell

Product Performance

  •  Good lubrication extreme pressure, suitable for aluminum processing, cars, grinding, drilling, milling and so on.
  • Suitable for all kinds of steel processing, as well as stainless steel and other difficult processing of a wide range of processing.
  • Excellent anti-rust and antibacterial, biological stability, reduce the late sterilization maintenance services, extremely long service life.
  • No sulfur, phosphorus and other additives and nitrite.   
  • Stable, low foam, anti-hybrid ability.
  • Working fluid transparent processing of the work piece visibility is good, better cleaning.
  • Low foam design recipe, very suitable for high-pressure CNC machine tools, widely used in a variety of stand-alone and centralized for the liquid system

Product Parameter

 

 

Project

Squastar 77 Synthetic Cutting Fluid

Appearance

Light Green Transparent Liquid

PH value(5% Aqueous solution )

8.5-9.0

Density, g/ml

About 1.013

Cast iron chip rust test (3%,water solution )

0 Level

GB aluminum corrosion test(5% water solution )

B Level (pass)

GB Cast Iron Corrosion Test(5% water solution )

A Level (pass)

Lubrication performance four ball test PB value(5% water solution)

132  KG

                                  

Processing materials and the use of concentration and application recommendations:

 All kinds of aluminum alloy material series, including aviation aluminum, Ferrous metal (including stainless steel)

Plastic and composite materials

The using concentration of this product is between 3-10%, depending on the process and materials and the specific circumstances of the user, please check below:

Car milling 2~5% Thread cutting and forming 3~8%
Deep hole drilling, boring hole 4~8% Reaming 6~10%

 

Pitting and lattice corrosion tests of aluminum alloys:

Aluminum alloy test piece:

Metal element

Silicon

(Si)

Iron

(Fe)

Copper

(Cu)

Manganese

(Mn)

Magnesium

(Mg)

Chromium

(Cr)

Zinc (Zn)  Titanium (Ti)

Aluminum

(Al)

% 0.5 0.5 4.14 0.4 1.4 0.01 0.25 0.17 > 92.6

 

 

Aluminum Alloy Corrosion Test Method:

Electronically scanned photos

Aluminum alloy test piece immersed in  Squastar 77 processing fluid(5%) after 3 days,

an electron microscopy was performed,

Observe whether the surface of aluminum alloy test pitting and lattice corrosion

Blank aluminum alloy test piece.

The aluminum alloy test piece is immersed in the processing solution for 3 days.

Test Result

 

The appearance of the test piece does not change color,

 No lattice corrosion and pitting

 

Storage: avoid the acid, water environment, should be cool and dry place to store

 

Packaging & Shipping

 

FAQ

Hi, please allow me say"Thank you" firstly. Beacuse you receive my ''Thank you'' ,that mean you read our product detals off.Then please read the following information. If there is somthing that we never mentioned, please contact us immediately. And you have some doubt about the following information, also contact us. Different ways for different condition.

1.How can I get reply fastly?

Please send inquiry through Alibaba directly. The inquiry page is at the right of the page/screen or the end of the page/screen; 

Before getting price,we need to know accurate product, mold number and order quantity. When you want to contact us, we will be your side. Thank you. 

2.How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality.

If you need a small bottle samples,we can send free sample to you, you only need to pay for the freight when it arrive.

3.How long can I expect to get the sample?

You can use your own express account or prepay us if you do not have an account.after the express charge are deal with,the samples will be ready for delivery in 3-7 days and arrive in 3-5 days.But it is always depand on which country you are and others.

4.Can you do the design for us?

Yes. We have professional engineers and having rich experience in designing to meet the requirements of customer's parameters or level.

DO THE DESIGN/OEM/ODM and others if you request. 

5.Can you provide the MSDS(material safety data sheet) report?

 The MSDS report are important for shipment(custom clearance),so we will provide this after the order confirmed or the cargo ready to ship,but at the negotiation will not be provided,please understand!

Company Information

 ABOUT SKALN

  SKALN Oil (Chongqing) Co.,Ltd is one of the most mature and popular brand at industrial lubricant oil field. We have provided products to most of machinery and equipment professionally in domestic. There are many kinds of different products in our factory, such as metal working fluid, cutting oil, heat transfer oil, chain oil, quenching oil, hydraulic oil, grease and so on.

  After more than 20 years of accumulation and growth, we have rich experience in production. Every process is strictly monitored. Also have big warehouses and factories in Chongqing and Shanghai, near the sea port. It means product quality is in our control by us. So we have stable product performance and product price. Also easy for transportation. 
  Our brand and logo comes from the nature, it means we pursue environment-friendly and sustainable development. At the same time, we believe " Equality andm mutual benefit and exchange of goods needed" cooperation so that we can go further. 

 

 

Contact Us

Plz be free to contact us, we are always here and waiting for you. If urgent, call me any time. 

 Go Back to Homepage


Product Image

 SKALN Squastar 77 Semisynthetic Grey Cast Iron Cutting Fluid 1
Img 1

Send Inquiry to this Member

SKALN Oil (Chongqing) Co.,Ltd

Suite 7-4, Block 4,Gaoke Trading Building, No.64 Huangshan Avenue, Yubei District, Chongqing, China.

Phone:
0086-23-67862326
Fax:
Contact:
Echo Zhang (Sales Manager)
Mobile:
15730333342

Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Lubricant Made In China Products

,  

Lubricant China Suppliers and China Manufacturers