Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

2.4G RF IP65 RGBW wifi Android IOS system LED garden spike light 

1)Soft starting mode design, the lighting will get brighter and brighter when power on, 100% full brightness within 2 seconds.
 

2)RGB+W/WW or WW/CW lighting color, with 640,000 different colors and 9 dynamic color changing modes;

3)Remote controlled by 2.4GHZ wireless LED controller, max controlling distance can reach 30 meter, strong anti-interference capacity or smart controlled by iOS/Android Apps from your mobile phone, manage the lighting status of flood light anytime and anywhere.

4)Memory function, the lighting resumes the previous lighting status after power on again.

5)Bridgelux RGBW COB LED with built-in Mean-Well LED Driver, ensuare long and stable work status.

6)High density die-cast aluminum housing, anti-corrosion & anti-oxidation, fast heat dissipation feature.

7)IP65 Waterproof, can be widely used as landscape lighting outdoor for building, villa, bridge, gardens, hotels, museum, etc

2.4G RF RGBW Remote Controller

It is a high-performance RGB led touch remote bulb, adopting the most advanced PWM control technology,owning 640 thousand colors and 20 automatical changing modes to choose.

With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti-interference ability ,high speed telecommunications, etc.

The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use 

How to clear one ID

Please choose the light that you do not want to use remote controller switch off.
Please long press ALL-ON button within 3 seconds when you switch on until you see the light blink 6 times.Then you can not use this remote controller to control this light.

How to clear off all ID
Please follow how to clear one ID, just press long ALL-OFF button instead off ALL-ON button.
 

Bulb and wireless remote controller and APP installation

1. Battery installation
Please take the remote controller and carefully press the battery cover and push it away in a downward motion. Install two AAA batteries into the remote controller. Exactly match the negative pole of the each battery into the largest spring. Do not touch the color ring when you install the batteries. 

2.App installation
Download and finish the installation of the IOS and Android APP as per wifi controller.

3.led bulb installation 
Talk the led bulb out of packing, hold it by the acrylic lens.
Switch off the power at the wall or lamp switch before installation.
Replace the original light bulb with the new wireless led bulb.
Switch on the power, the led bulb will light under normal circumstances.
Sync the remote or you APP to the bulb as per linking new lights to the remote controls and set to full brightness, change color or white.
If the bulb does not sync, then firstly clear the first channel as per unlinking the lights.

9 programs
Program 1:night light function.
Program 2: Red/Green/Blue cycle changing 
Program 3:dimmable cool light mixed by RGB
Program 4:Red wave effect.Red lighting is dim up and down.Speed can be adjust.
Program 5:Green wave effect. Green lighting is dim up and down.Speed can be adjust.
Program 6:Blue wave effect. Blue lighting is dim up and down.Speed can be adjust.
Program 7:Yellow wave effect. Yellow lighting is dim up and down.Speed can be adjust.
Program 8:Orange wave effect. Red lighting is dim up and down.Speed can be adjust.
Program 9:Pink wave effect. Pink lighting is dim up and down.Speed can be adjust.

Assigning remote Controller 
Press any "I" button of the 4 zones 3 times immediately, once you switch on the power and see light from lamp.
If this step is done successfully, the lamp will blink 3 times.

Unassigning remote controller 
Long-press (previously assigned) "I" button 5 times immediately, once you switch on the power and see light from lamp. If this step is done successfully, the lamp will blink 9 times

The entire housing coated 

Processed by electrophoretic paint, measured by 200hours salt test,the entire housing has excellent corrosion resistance.

With multiple adjustment points theadjustment angel can be up to 270°.
 

Protection rate:IP65

By using waterproof connectorand silli conrubber sealing,the protection rate can achieve IP65,meeting the requirement forharsh,tough environment.Endurancing the corrosion of air,chemical acid,alkaline,salt and other materials,can be used in allkinds of harsh conditions for long term

60 degree beam angle 

You can achieve any beam to meet your demand .

You can adjust it and it is easy to paking and to save the place.

The cable is 3m .And you can made one for yourself.

.

We past the CE RoHS FCC LVD EMC certification to endure the high quality 

About Company

GLEDOPTO CO.,LTD is a manufacturer specializing in the research, development and production of LED lights, which has two LED business groups.
 

One is Traditional LED Business Group (TLBG) located in Zhongshan since 2005.Our LED lighting products mainly include: LED tubes, LED spotlights, LED bulbs, LED strips indoor and outdoor, LED bars indoor and outdoor, LED modules indoor and outdoor, LED bulb, and so on. Our products have been exported to Europe, North America, Southeast Asia, Middle East, etc. Our products have CE certification and RoHs compliance for Europe market, and PSE for Japan market, C-tick for Australia market, etc

Contact Us

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
    Secondly We quote according to your requirements or our s estions.
    Thirdly customer confirms the samples and places deposit for formal order.
    Fourthly We arrange the production.
 

Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
 

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
     Secondly, during the guarantee period, we will send new lights with new order for small quantity. For 
     defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.