Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

RGBW RGB LED bluetooth globe bulb with 12 mode

On-off shaking and 12 color change modes 
Saturation fuction, There existing 256 colors .you can choose the color you like.
Spining top color changing funticon
1.6 million colors change,Dimmable from 100% to 1% 
(1% and 2% and 3%..... can show for every level )
RGB color changing and CCT (2700-6500K) adjustable. RGB+Warm white +Cold white 
High brightness smd5050 RGB LED+smd5630 white led 
Ac100-240v available,low power consumption 
luminous Flux:850lm
CE &ROHS, 2 Years warranty

Product Features:

1.you can change the password and re-set password.

2.Through the led display order combination, we can see powerful lighting effect.
3.Using high quality materials and high-tech, good thermal conductivity for heat dissipation.
4. Comparing with incandescent is more energy-saving, and the power rate is 1w than 6w.
5.Widely used in commercial areas, hotel, supermarkets, offices and home lighting.
6.It not only can protect your eyes, but also it is enviromental protection. Cause it is no radiation, no ultraviolet.

 It is a high-performance RGBw led touch remote bulb, adopting the most advanced PWM control technology, ,owning 640 thousand colors and 9  automatical changing modes to choose.
 

Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). It is widely used in KTV, bedroom, bar, etc.

With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti-interference ability ,high speed telecommunications, etc.

The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use .

The forging and stamping aluminum lamp body,to the maximum extent,successfully solves the heat sink trouble by air backflow with increasing more fins. Cover of led bulb is made of PC and nanometer coolant, light transmittance over85%, light transmitting evenly. 

Programming:(code clearing and code matching)
Code matching :
For a new kit ( remote& bulb), the remote can work only when it is programmed to the bulb.
Please follow the below instructions:
Confirm correctly connect between the bulb and the power.
Switch off the power, then switch on again, and press key 5 once (within 3 seconds)
the moment you see the light is on.The LED bulb blinks twice slowly when it is done.

Code clearing :
The code can be cleared as needed.
The kit (remote and bulb) will stay in the original state after code clearing.
It can work when code rematching is done.
Please follow the below instructions:
Also, Confirm correctly connect between the bulb and the power.
Switch off the power, then switch on again, and long press key 5(within 3 seconds)
the moment you see the light is on.The LED bulb blinks nice times swiftly when it is done.

Product details of description:

It is a high-performance RGB led touch remote bulb, adopting the most advanced PWM control technology,owning 640 thousand colors and 20 automatical changing modes to choose.

With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti-interference ability ,high speed telecommunications, etc.

The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use .

Caution:
1.Please check whether the input voltage and lamp base is in accordance with the product.
2.Please don’t connect wires with power on.
   Please switch on again only when it is in right connection and no short circuit.
3.Please keep your finger off the touch ring when installing the batteries, to improve its sensitivity,and use the remote ( 3 seconds later) after the batteries are installed.
Please reinstall the batteries, if the touch ring is found low-sensitivity.
4.Please do not put the bulb in the place with widely range metal area or strong electromagnetic wave nearby, otherwise,the remote distance will be seriously affected .

Both RF remote control and wifi available, control your lights from anywhere in the world.
4 Unique zones, individual light control, you can control multi rooms individually.
RGB millions of colors to select from, 10 pre defined modes for uninterrupted lighting demands such as mode etc.
Also available in pure white, dim control option can be activated with remote light control, Iphone or Android.
Has memory function to resume previous settings.
High brightness smd5050 RGB LED+smd5630 white led 

We pass the CE FCC RoHs LVD EMC certification to endure the high quality and the satification of our customer.

The wifi 2.4g wireless 5w Gu10 bulb light main apply to home lighting, hotel rooms and small office, is good for making a confortable stage ligthing for your family & friends.

1.Combination function of basic illumination and ambiance lighting;
2.Wide options of over 640,000 colors,change according to your mood;
3.8 grades brightness adjusting, to achieve real energy-saving;
4.Use RF signal for telecontroller, free and easy operation,no direction in 20 meters;

5.Long life, lifespan up to 50000hours;
6.Low energy consumption, save 50% more than Low energy circular fluorescent Lamp;
7.No UV radiation, no stroboflash;
8.Accord with European Union CE, RoHS directive;
9.Synchronously controll any quantity of lamps by one remote. 

Contact us

GLEDOPTO CO.,LTD is a manufacturer specializing in the research, development and production of LED lights, which has two LED business groups.

One is Traditional LED Business Group (TLBG) located in Zhongshan since 2005.Our LED lighting products mainly include: LED tubes, LED spotlights, LED bulbs, LED strips indoor and outdoor, LED bars indoor and outdoor, LED modules indoor and outdoor, LED bulb, and so on. Our products have been exported to Europe, North America, Southeast Asia, Middle East, etc. Our products have CE certification and RoHs compliance for Europe market, and PSE for Japan market, C-tick for Australia market, etc

FAQ

Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
 

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 
 

Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
 

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
     Secondly We quote according to your requirements or our s estions.
     Thirdly customer confirms the samples and places deposit for formal order.
     Fourthly We arrange the production.
 

Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
 

Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
 

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
    Secondly, during the guarantee period, we will send new lights with new order for small quantity. For 
    defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call         according to real situation.