Model: | BE-CS-Series |
---|---|
Brand: | DGBELL |
Origin: | Made In China |
Category: | Electronics & Electricity / Other Electrical & Electronic |
Label: | salt spray test , corrosion test , salt fog test |
Price: |
US $6500
/ set
|
Min. Order: | 1 set |
Product Application
This equipment mainly used for simulating salt fog corrosion, testing the corrosion resistance test of products. After anti-corrosion treatment on the various materials surface, including coating, electroplating, inorganic and organic film, anode processing, anti-rust oil, test performance in anticorrosion.
Technical Parameters |
|||
Test machine Temperature Scope |
RT(Room Temperature)~55℃ |
||
Pressure Tank Temperature Scope |
RT (Room Temperature) ~70℃ |
||
Brine temperature |
35℃±1℃ |
||
Temperature Fluctuation |
≤±0.5℃ |
||
Temperature Uniformity |
≤±2℃ |
||
Temperature Deviation |
≤±1℃ |
||
Spray Flow |
1 ~ 2ML/80cm2 1hr (Based on mean value by 16
|
||
Relative Humidity |
≥85% HR |
||
Spray Pressure |
1.00±0.01 kgf/cm2 |
||
PH |
Neutral 6.5~7.2 /Acid 3.0~3.3 |
Specifications |
|||
Model No. |
Internal Dimension (mm) |
External Dimension (mm) |
|
BE-CS-60 |
W600*H400*D450 |
W1070*H1180*D600 |
|
BE-CS-90 |
W900*H500*D600 |
W1310*H1280*D880 |
|
BE-CS-120 |
W1200*H500*D1000 |
W1900*H1300*D1400 |
|
BE-CS-160 |
W1600*H500*D1000 |
W2300*H1400*D1300 |
|
BE-CS-200 |
W2000*H500*D1200 |
W2700*H1500*D1500 |
Standard Complance
1.ASTM B117 Salt Spray (Fog) Test
1. ASTN D1654 Standard Test Method For Evaluation of Painted or Coated Specimens Subjected to Corrosive
2. Environments
3. ASTM D3359 Standard Test Methods for Measuring Adhesion By Tape Test
4. JIS H8502 Methods of Corrosion Resistance Test For Metallic Coatings
5. IEC 60068-2-11-1981 Basic Environmental Testing Procedures Part 2: Tests, Test Ka: Salt Mist
6. IEC6802-52 1996 Environmental Testing-Part 2: Tests-Test Kb: Salt mist, cyclic (Sodium Chloride Solution)
7. GJB 150.11A-2009 Laboratory Environmental Test Methods For Military Material- Part 11: Salt Fog Test
8. CNS 4159 CASS Test-Copper Accelerated Acetic Acetic Acid Salt Spray (Fog) Test
9. CNS 4158 Method of Salt Spray Fog Test for Surface Finishing
10. MIL-STD810F Environmental Engineering Considerations and Laboratory Tests
11. MIL-STD 202 Test Method Standard: Electronic and Electrical Component Parts
12. MIL-STD 883 Test Method Standard: Microcircuits
13. MIL-STD 1344 Test Methods For Electrical Connectors
14. RTCA DO-160 Section 14 (Avionics) IEC 68 Part 2
15. NEMA 250 Enclosures for Electrical Equipment
16. SAE J2334 International Surface Vehicle Standard-Cosmetic Corrosion Lab Test
17. SAE J 1211 Recommended Environmental Practices For Electronic Equipment Design
18. GM 9540P General Motors Engineering Standards: Accelerated Corrosion Test
Features
With automatic / manual water supply system ,can automatically add water when water shortage, do not interrupt test.
Temperature controller with digital display, PID control error ±0.1℃
Double overheating protection, water shortage warning
Adopting steam direct heating mode, heating speed and uniformity, reduce the standby time
With automatic/manual water system, water shortage will automatically added water, test don't interrupt., PID control error 0.1 ℃
Double over temperature protection, insufficient water level warning
Adopts steam heating mode directly, fast and uniform temperature rise, reduce the standby time