| Model: | MSSNC-7 |
|---|---|
| Brand: | MEISHUO |
| Origin: | Made In China |
| Category: | Construction & Decoration / Other Construction Materials |
| Label: | stair tread non slip , non slip stair tread , stair treads |
| Price: |
US $7
/ meter
|
| Min. Order: | 100 meter |
| Last Online:16 Jun, 2015 |
Specification
| Name: | Stair Nosing |
| Infill Material: | carborundum/rubber(PVC, EPDM) |
| Surface treatment: | mill finish; anodized |
|
Color: carborundum stair nosing: red, black, blue, green, yellow, champagne, bronze, golden, vermillion, etc.
1)Professional experience(14 years) and support special design 2)Various colors for choosing or color as customer required 3)Various kinds of products for customer selection 4)OEM is welcomed 5)Competitive price with more discount(Real Manufacturer for wholesale ) 6)Excellent quality control(100% check one by one) 7)Fast delivery(within 15 days after payment received) 8)Good service before and after sales |
rubber stair nosing: black, brown |
|
|
Installation:
| 1.Ensure that the stair surface is level and flat. |
| 2.Select the most suitable cartridge adhesive for interior/exterior usage. |
| 3.Ensure stairs are clean and free of debris, dust, grease and oil. |
| 4.Check the stair is dry and free from dampness |
| 5.Select the nosing carrier and check for the correct fit on the required stair. |
| 6.Do not apply the insert material at this stage. |
| 7.Carefully mark through the drill holes, ensuring that the nosing is tight against the riser, carpet or vinyl. |
| 8.Remove nosing from the stair, and drill and plug the tread ready for installation. |
| 9.Apply the adhesive to the underside of the nosing and replace on the step. |
| 10.Remove the nosing and allow the adhesive to cure for the recommended time. |
| 11.Replace and refit the nosing carrier to the stair tread, and screw down firmly. |
| 12.Ensure that the screws are flush to avoid "show through" on the insert material. |
| 13.Peel back the double sided tape, ensuring no dust or fibre is allowed onto the surface. |
| 14.Place insert material (smooth side down) into the channel from both ends and smooth into the middle of the profile.
|
