| Model: | MSSNC-5 |
|---|---|
| Brand: | MEISHUO |
| Origin: | Made In China |
| Category: | Construction & Decoration / Other Construction Materials |
| Label: | stair treads stripes , stair nosing stripes , Chian stair nosing |
| Price: |
US $7
/ meter
|
| Min. Order: | 100 meter |
| Last Online:16 Jun, 2015 |
Carborundum Stair nosing & treads stripes for stairs from China
Specification
| Name: | Stair Nosing |
| Infill Material: | carborundum/rubber(PVC, EPDM) |
| Surface treatment: | mill finish; anodized |
|
Color: carborundum stair nosing: red, black, blue, green, yellow, champagne, bronze, golden, vermillion, etc. |
rubber stair nosing: black, brown |
|
|
Installation:
| 1.Ensure that the stair surface is level and flat. |
| 2.Select the most suitable cartridge adhesive for interior/exterior usage. |
| 3.Ensure stairs are clean and free of debris, dust, grease and oil. |
| 4.Check the stair is dry and free from dampness |
| 5.Select the nosing carrier and check for the correct fit on the required stair. |
| 6.Do not apply the insert material at this stage. |
| 7.Carefully mark through the drill holes, ensuring that the nosing is tight against the riser, carpet or vinyl. |
| 8.Remove nosing from the stair, and drill and plug the tread ready for installation. |
| 9.Apply the adhesive to the underside of the nosing and replace on the step. |
| 10.Remove the nosing and allow the adhesive to cure for the recommended time. |
| 11.Replace and refit the nosing carrier to the stair tread, and screw down firmly. |
| 12.Ensure that the screws are flush to avoid "show through" on the insert material. |
| 13.Peel back the double sided tape, ensuring no dust or fibre is allowed onto the surface. |
| 14.Place insert material (smooth side down) into the channel from both ends and smooth into the middle of the profile.
|
