Home > Products > Chemicals > Adhesives & Sealants

Filler & Adhesive, hardens like metal
Good for Automotive/Household/Industrial use
high strength
rapid solidification 

1.Applications 
it can be used on metal, glass, ceramic, wood and electronic components

2.Introductions 

It is a two-part adhesive consisting of an epoxy resin and a hardener.  When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond in 4 minutes for most projects.  Available in a convenient dual syringe which delivers equal parts of both components every time.
It can be used as an adhesive for a wide range of materials or as a versatile filler for gap filling, surface repairs and laminating.  It does not shrink and is resistant to water and most common solvents.  It can be tinted with earth pigments, cement or sand for colour matching.  It can be sanded and drilled.

3.Useage

1.The ratio or principle agent and curing agent is 1:1. Stir after mixing and apply to the bonding piece.simply press together to bond.

2.Surface treatment:Remove all oil and stain on the piece to be bonded by cleaning or grinding. Rubber and plastic  surfaces must be treated prior to bonding.

4.ATTENTION:

For best adhesion, clean and roughen bond area priod to application.

Twist off desired amount.

knead to uniform color.

Repairs should be in place before hardening begins (Usually within two minutes)

Can be drilled, filed, tapped, machined, etc. after one hour