Model: | - |
---|---|
Brand: | SYNID |
Origin: | - |
Category: | Chemicals / Adhesives & Sealants |
Label: | fire resistant seala , high-temp glue , fire place cement |
Price: |
US $1.2
/ pc
|
Min. Order: | 200 pc |
Live Chat: | Last Online:02 Apr, 2014 |
S456 is a one part, high performance silicone sealant with ultimate tensile strength, mechanical properties for curtain wall, Total Vision System (TVS) and architectural applications. It has very good weathering resistance, durability, sealing and bonding properties.
For Total Vision System (TVS).
Aquarium, big fish tank and general decorative usages.
Skylinghts, canopies and general glazing.
For butt-joints and corner joints.
For special architectural glazing.
Non-oily wood and some other construction materials.
Easy to use,one-part,no mixing required.Can be dispensed with an ordinary caulking gun.
Cures to a strong,flexible seal capable of withstanding movement in and around the joint.
Acetic Cure.
Can be applied in any season.
Outstanding weatherproofing abilty,resisting to ultraviolet ray,ozone,snow,or temperature extremes.
Non-slumping;can be used in vertical and overhead joints.
12 months from manufacture date when store in cool dry locations below 25°C, keep away from heat source and direct sunlight during storage.
Translucent. Contact us for special colours.
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.
Test Parameter |
Unit |
Result |
As Supplied Tested at 23°C and 50% RH |
||
Specific Gravity |
g/ml |
0.99±0.02 |
Flow (sag or slump) |
mm |
0 |
Extrusion Rate Skin Time |
ml/minute minute |
130 5~10 |
Tack-free Time |
hour |
≤1.0 |
Curing time (5mm) |
hour |
≤8 |
As Cured-after 21 days at 23°C and 50% RH |
||
Durometer Hardness, Shore A |
Points |
30 |
Movement Capability |
% |
±25 |
Tensile/Modulus at 50% Elongation |
Mpa |
0.32 |
Tensile/Modulus at 100% Elongation |
Mpa |
0.38 |
Ultimate Tensile Strength Ultimate Elongation at Break |
Mpa % |
0.45 300 |
Payment Terms: | TT / LC |
---|---|