Home > Products > Electronics & Electricity > Electronics Stocks

Dc line 2 (E2EH - / X/D) Size M12M18M30 Shielding shielding Project model E2EH X3D/E2EH - X7D mind E2EH - X12D 3 mm7mm12mm detection distance Set distance * 10 ~ 2.4 mm0 mm0 ~ 5.6 ~ 5.6 mm Should be differential detection distance is less than 15% Magnetic metal detectable objects (non-magnetic metal detection distance is shorter.) Standard testing objects iron 12 * 12 * 1 mm iron 21 * 21 * 1 mm iron 36 * 36 * 1 mm * 2500 hz300hz100hz response frequency Power supply voltage (using the voltage range) DC12 ~ 24 v ripple (p - p) below 10% (DC10 ~ 32 v but above 100 ℃, the maximum 24 v) Leakage current 0.8 mA Control switch output capacity of 3 ~ 100 ma, + 100 ~ + 110 ℃ for 3 ~ 50 ma.* 3 polar residual voltage type: 3 v below, nonpolar (E2EH - X/D/T) for the below 5 v * 3 (when load current is 100 ma, cable 2 m long) Lamp type D1: action (red), set to display (yellow), D2: action show (yellow) Mode of action (close to the test object) D1 type: NO, D2 type: NC, for details please see the Catalog of "input and output circuit diagram" sequence diagram Surge protection circuit of absorption, load short circuit protection When environmental temperature range: 0 ~ + 100 ℃ (0 ~ + 110 ℃, 1000 hours) * 4 Save: 25 ~ + 70 ℃ (without freezing and condensation) : work environment humidity range, save time by 35 ~ 95% RH (no condensation) The influence of the temperature of 0 ~ + 70 ℃ temperature range of detection distance change is within plus or minus 10% at 23 ℃, + 70 ~ + 100 ℃ temperature range change detection distance is within plus or minus 15% at 23 ℃, + 100 ~ + 110 ℃ temperature range change detection distance is within 15% ~ + 20% at 23 ℃ The influence of the voltage at the rated supply voltage range of plus or minus 15%, ratedImpact (durable) 1000 m/s2 X, Y, Z direction 10 times each IEC standard IP67 protection structure, standard IP69K DIN40050-9 * 5 Connection wire draw out type (standard cable 2 m long), plug and socket type The quality (after packing) wire leads to about 80 g, 145 g, 220 g Connectors, about 30 g about 55 g 125 g Material shell, fastening nut (SUS316L stainless steel) Test surface of PBT, Conductor heat-resisting PVC (wire drawn type) Attachment specification