Ⅰ Introduction
Our factory is professional manufacturer of autoclave aerated concrete plant in China. We support 4m, 4.2m, 4.8m and 6m series AAC complete plants for Guangdong, Zhejiang, Henan Provinces. The equipment produced by our factory has become generally using equipment for the old and new AAC block manufactures.
Ⅱ Feature
1. Two ways of pouring: fix-point & moving;
2. Quinary system cutting, and decimal system cutting;
3. Automatic control, and manual control;
4. Factory building adopts big-bay designing;
5. Pre-curing before cutting;
6. Steaming after removing the burrs.
Ⅲ Product properties
1. Good property of thermal insulation;
2. Light weight;
3. Good sound insulation;
4. Block size is high in precision, inaccuracy: 3,1,1;
5. AAC block is non-flammable and safe;
6. Good processibility.
Ⅳ Technical parameter
Ⅴ Production process
1. Batching raw materials;
2. After batching, put the mixed raw materials into pouring machine, and make it into mixed slurry;
3. Pouring the mixed slurry into mould after agitated well;
4. After pre-curing after a period of time, the green cakes can be cut after they meet a certain hardness;
5. The hanger can turn over the mould 90°overhead;
6. Demoulding device is used for separating the mould and green cake. Then, the hanger hangs the green cake with side panel to cutting vehicle;
7. The cutting machine cuts two sides of the green cake vertically first;
8. Then, cutting green cakes in longitudinal direction;
9. Finally, horizontal cutting in vertical direction, and removing the burrs.
10. The cut green cakes with side panels are hang to steaming vehicle by semi-finished products hanger;
11. Grouping the cut green cakes, and moving into autoclave;
12. Steaming the green cakes in autoclaves;
13. The final products move out of autoclaves after steaming;
14. Stacking the final AAC blocks by final product hanger;
15. Loading the final AAC blocks after packaging;
16. Side panels return along with its railway;
17. Side panels combine with mould frames;
18. Cleaning the side panels and moulds, waiting for next pouring;
19. Distributing steel bars for floor panels.
Ⅵ Technical Service
1. Plant designing, including: process drawing, civil construction drawing, electric power drawing, water supply drawing, and air pipe line drawing etc.
2. Technical guidance, including: equipment order consultation, equipment installation guidance, establishing plan for production preparation etc.
3. Providing technical details of factory setting, including: management system, personal responsibility of production line, techincal operation procedures, safty operation procedures, catalog of trial production tools, laboratory equipment and test methods.
