Product Description
-
Detailed parameters:
●This adopts step-less material matering,material feeding speed ranges from 7 to 28m/min.
●Each principal axis adopts independent drive to electric motor,features stronger cutoff force.
●Adjusts for principal axis integrates at central or frontal side,features easy operation.
●Galvanized workstation features superior abrasion resistance.
●Double-deck working tables;it is easy for maintenance.
●Equips with auxiliary ynit alarming lack of marerial,it effectively improvises smooth feed=in while lack of material.
●Active roller below improves feeding efficiency.
●Adopts cental charging system,features convenience and promptness.
●Equips with worid-class electric elemrnt,features superior srability.
●The upper horizontal spindle is equipped with a front supporting device;the tigidity of main spindle is enhanced.
●Pneumatic pressing feeding roller section by section adjusts for pressing force,it favors for smooth feed-in of different thickness of timber.
●With fully sealed safety protective cover,this effectivel avoids flying logging debris and noise blocked, and evenacts as safety protection.
Specification And ModelM630A Motor Power Working Width 25-300mm Working Thickness 8-200mm Working Table Length 2000mm Feeding Speed 7-28m/min Main Source Pressure φ40mm Main Shaft Revolution 6000r/min Pneumatic Source Pressure 0.6MPa Motor Power 1"Lower Shaft 15kw/20HP 1"Upper Shaft 15kw/20HP Right Vertical Shaft 11kw/15HP Left Vertical Shaft 11kw/15HP Top Spindle Lifting Motor Left Shaft Adjusting 2"Upper Shaft 15kw/20HP 2"Lower Shaft 15kw/20HP Universal Spindle Motor Power Feeding Beam Lifting 0.75kw/1HP Feeding Motor 7.5kw/10HP General Power 90.25kw/121HP Hydraulic feed motor Cutter Diameter Right Vertical Shaft φ125-φ180mm Left Vertical Shaft φ125-φ180mm 1"Lower Shaft φ125mm 1"Upper Shaft φ125-φ180mm 2"Upper Shaft φ125-φ180mm 2"Lower Shaft φ125-φ180mm Universal Spindle Remarks/mm Feeding Wheel Diameter φ140mm Dust Outlet Diameter φ140mm Physical Dimension(L*W*H) 4560*1725*1735
