Home > Products > Transportation > Transportation Facilities > Roadway Safety

• Model: SIG-D50W(White), SIG-D50Y(Yellow)

• Height of protruding part: 11.5mm

• Color available: White, yellow

• Material: Tempered glass

• Compressive strength

  • With reference to inspection method of CNS 13762, the compressive strength without external rubber base can be greater than 12 tons. (First, to install the specimen on the tester vase with a piece of newspaper folded into five. Then, to coincide both the center of the steel bar(min. diameter 25mm, min. thickness 10mm) and the convex part of the specimen. To avoid the vibration during the testing process, so increase lading slowly, the rate of loading increase is maintain 49~68.6kN/min(5,000~7,000kgf/min). At last, the loading increase to 117.6kN(12,000kgf).)

• O-zone resistance test for the rubber base

  • With reference to CNS 10018 for 50pphm*40℃*20%*72h, there must be no cracks.

• Weight: 177 g.

• Packing: 48pcs/carton
  
  
  

Features:
________________________________________________________________________________________________________

• No blind spot in any curve.

• High degree of surface hardness and scratch-proof surface; if the product does break, it will form very fine particles and will not cause secondary damage to human body and vehicles.

• The protruding height is only 12 mm. The product shape is smooth without sharp corner, which does not influence passing of vehicle and pedestrians (normal road marking reflector has height of 25 mm and highway marking reflectors is 19 mm)

• Life of application for this product in golf field is more than 20 years (other plastic reflectors will have aging problem due to ultra-violet ray after 1~2 years)

• The installation is easy and harmless to the landscape, which can be made on the road or wall surface.

• High strength and long durability.

• Fully automatic production with machinery.