Home > Products > Transportation > Transportation Facilities > Roadway Safety

• Model: Sig-W (white), Sig-Y (yellow)

• Height of protruding part: 25mm

• Diameter: 100mm

• Material: Tempered glass

• Best compressive strength

  • 40 tons above

• Highest impact strength

  • According to the CNS13762, the test standard of Taiwan, dropping 1.04 kg of steel ball from height of 1.5 m and there is no crack at all on the product.

• Certificates

  • CNS13762 (Taiwan) at 1997

  • DIN EN1463-1 (Europe) at 2004

  • JT/T 390-1999 (China) at 2005

  • ISO 9001 at 2006

  • DIN EN 1463-2 (Europe) at 2006

  • CE certificate (Europe) at 2008

• Color available

  • White, Yellow

• Weight: 540±20 g

• Packing: 13.5kgs/carton, 24pcs/carton, 80 cartons/pallet

Features:
___________________________________________________________________________________________________________________

• No blind spot in any curve. Performance out beats any flat type reflector.

• High degree of surface hardness and scratch-proof surface; the reflection can last extremely long

  • This is at average of 40-50 tons according to inspection of CNS 13762; if the market requires, product with compressive strength of greater than 60 tons can be provided.

• High strength and long durability.

• The protruding part is 100% reflective.

• Smooth surface and not easy to accumulate dust, which needs no cleaning and maintenance.

• Fully automatic production with machinery.

• The lifetime is 15 times longer than traditional plastic pavement marker.

• Construction Method for Tiger Eye:

  • 1. Provide well safety warning facilities.

  • 2. Use the drilling machine to make a hole with diameter of 100mm and depth of 25mm (mark on the drilling machine or add a ring slot on the drilling bit to ensure certain depth of the hole drilled).

  • 3. Use the bush tool to remove asphalt from middle of the hole (in case of cement road surface, use jack hammer to crush the cement)

  • 4. Blow away the sandy soil and water in the hole with high pressure air (or absorb water with sponge).

  • 5. Use mold with fixed height to test if the depth of hole is suitable or not (otherwise modification must be made).

  • 6. Place asphalt glue or epoxy resin into the hole (The asphalt glue is fast hardening and fast to work with; it influences traffic less with low cost, which is suitable for highway, large traffic flow or large amount of continuous installation. For loose works with less quantity, epoxy resin is used).

  • 7. Place Tiger Eye into the hole and rotate for about 30°; finally, lightly knock the top of Tiger Eye with rubber hammer for smoothness and complete fixture.