Model MD1 Electric hoist
Welcome to contact us! Tel : +86-373-8827000, mobile: +86-18738582556.
Concepts of products
CD1 and MD1 series of wire-rope electric hoist are improved ones on the basis of the original CD and MD. They are widely used and very popular among users because of their characteristics of tight structure, smart body, safety and reliability, common-used parts, well changeable property, strong lifting capacity as well as convenient maintenance.
The hoists exist in form of stationary style and crab-style. The former is divided into four styles that is A1,A2,A3 and A4 according to the position (up, down left and right) of the fixed trestle. It can be installed directly on the frame. The latter with movable function can be installed on the track. CD1 model lifts with single speed, and MD1 model not only with usual speed but also with low speed.
On such a basis, CD1(GD)、MD1(GDS) and WH164 20t、32t are developed by our technicians. They share the same structure principles and installation ways with the original CD1 and MD1. The following contents all take CD1 and MD1 for example.
Our running scope mainly lies in series of electric hoist with 0.25t~32t load and 3m~30m height.. In addition, your special needs shall be met and non-standard hoists shall be manufactured.
Chief use:
The crab-model installed on many kinds of cranes of suspending from T-steel can lift heavy objects straight or in a curve. The stationary ones installed on fixed trestle can lift objects vertically or from different angles.
The products are widely used at industrial ore enterprises, railway, harbors, warehouses and materials sites etc. they are indispensable machinery to improve working conditions and efficiency in manufacturing.
Applicable scope and working conditions:
The product applies to such an environment as no fire, no explosive danger, no corrosive media and no dirt exist. And the temperature is between 20℃ below zero and 40℃ up zero, the wetness is no higher than 85%, the elevation is below 1000m. it is banned to lift melted metals, poisonous, combustible and explosive objects. The applicable power source is 3-phase alternating current ( A.C for short ) , 50Hz ( 60Hz ) frequency and (380V-660V ) voltage. Their rated load must be reduced by 20% accordingly as their working grade increases by one grade compared to their middle-level working grade.
