Home > Products > Electronics & Electricity > Electronics Stocks

Introduction:

EasyAVR M16 SK is a system produce by AVRVi for AVR study and product development, Rich in resources, JTAGICE emulator and ISP downloader on board, it's a perfect tool for your AVR mcu study.

EasyAVR M16 SK User guide : EasyAVR-atmega16-SK -user-guide.pdf ATmega16 ATmega32 development board kit

What's on the board:

Features:

The following key features have been implemented:

• JTAG ISP 2in1 On-board, you need not use other JTAG or ISP tool.
• ATmega16 onboard
  • ATmega16A Features:
  • High-performance, Low-power AVR 8-bit Microcontroller
  • 131 Powerful Instructions
  • 32 x 8 General Purpose Working Register
  • Fully Static Operatio
  • Up to 16 MIPS Throughput at 16 MHz
  • On-chip 2-cycle Multiplie
  • 16K Bytes of In-System Self-rogrammable Flash program memory
  • 512 Bytes EEPROM
  • 1K Byte Internal SRAM
• 8 LEDs and a 7 segment led on-board
• 2 RS-232 and RS485 communication port
• IIC E²PROM AT24C01
• LMV358 Signal conditioning circuit
• PCF8563 real time chip
• 1 Beeper
• LCD12864/1602/12232 connector

English user guid Contents
EasyAVR M16 SK 3in1 instruction 1
1. Product introduction 4
1.1 Introduction    4
1.2 Significant features    4
1.3 On-board resource list  4
1.4 System requirements 5
2. System self-test 5
2.1 Check up list of articles   5
2.2 Quick Start 5
2.3 System self-test process    6
3. Configuration DIP switches and jumpers   8
4. Driver Install   11
5. Software Install 12
5.1 Install ICCAVR  12
5.2 Install AVRstudio   13
6. Use on-board STK500 ISP for program  13
6.1 Connect hardware    13
6.2 Use AVRstudio ISP download  14
6.3 Use ICCAVR ISP download 15
7. Use JTAG for program 17
8. Use JTAG for emulation   18
9. Hardware resource    20
9.1 On-board AVR JTAG ISP 2in1  20
9.2 Power Supply    21
9.3 Atmega16 chip   22
9.4 8 separate LED  22
9.5 8 separate keys 23
9.6 Crystal oscillator and reset    23
9.7 7-segment LED display   24
9.8 USB1.1 communication interface  25
9.9 RS232 serial communication port 25
9.10 RS485 communication interface  26
9.11 18B20 and single bus   26
9.12 AD voltage adjustment potentiometer    27
9.13 PWM output 27
9.14 Real-time clock PCF8563    28
9.15 IIC bus EEPROM AT24c01 28
9.16 One active passive buzzer  28
9.17 LM358 signal conditioning  29
9.18 32Pin MCU external terminal    29
9.19 1602 LCD interface 30
9.20 12864 LCD interface    31
10. Material resources  32
10.1 CD content 32
10.2 Experimental contents  33
10.3 Expand board available 35
11. Service and support 36

The package includes:

• One Easyavr M16 SK board with JTAG and ISP on it
• One CD with user guide and the democode and schematic
• One 9V DC Power adapter
• One USB cable (A to B)
• One user guide