Home > Products > Electronics & Electricity > Electronics Stocks

ARM9 S3C2440 Micro2440SDK+3.5" TFT TouchScreen LCD Micro2440Core Board

S3C2440 400 MHz ARM9 in a "stamp" configuration with the processor, RAM
And Flash on the microboard and a carrier or I/0 board that does the rest, plus a 3.5" LCD

ARM9 S3C2440 Micro2440SDK+3.5" TFT TouchScreen LCD Micro2440Core Board Features:
Processor -- Samsung S3C2440 (ARM920T core) clocked at up to 533MHz
Memory -- 64MB SDRAM (up to 100MHz)
Flash -- 64MB NAND flash; 2MB NOR flash
Flash expansion -- 1 x SD card interface
Display -- LCD controller with four-wire resistive touchscreen interface; optional 3.5- or 7-inch LCD displays
Networking -- 1 x 10/100 Ethernet RJ-45 interface (DM9000 chip)
WiFi -- optional WiFi module
USB -- 1 x USB Host; 1 x USB Slave (B-type interface)
Serial -- 3 x serial ports
Audio -- 1 x stereo audio output interface; 1 x mic interface
Camera -- 1 x 20-pin (2.0mm space) camera interface; optional CMOS or USB cameras
Other I/O:
1 x 10-pin (2.0mm space) JTAG interface
4 x user LEDs
6 x user buttons
1 x PWM control buzzer
1 x adjustable resistance, for AD conversion test
1 x I2C bus AT24C08 chip, for I2C bus test
1 x 34-pin 2.0mm GPIO interface
1 x 40-pin 2.0mm system bus interface
Power -- RTC battery; power supply interface
Clock -- internal real-time clock and 12Mhz passive crystal system clock source
Dimensions -- 180 x 130mm)
Operating system -- Linux 2.6.13; WindowsCE.NET 5.0

Available SDKs
micro2440SDK software development kit (SDK) includes the following components, says Hiteg:
- ADS1.2 development environment
- H-JTAG burning and deb ing tool
- SJF2440 flash burning tool for Windows
- Jflash-2440 flash burning tool for Linux (source code provided)
- Serial tools CRT, dnw
- Bmp2t (picture transformer)
- USB driver for Windows XP/2000
- Vivi bootloader for Linux (source code provided)
- Test programs (source code provided)
- WinCE BSP and example project file

The Linux SDK also offers additional Linux development tools and Linux 2.6.13 kernel source code
As well as Qtopia and "embedded browser" source code.
- arm-linux-gcc-3.3.2 used for compiling Qtopia
- arm-linux-gcc-3.4.1 used for compiling kernel
- arm-linux-gcc-2.95.3 used for compiling Vivi
- Mkyaffsimage YAFFS filesystem image maker
- Drivers -- DM9000, TFT LCD, audio card, touchscreen, SD card, RTC, expansion serial port, USB camera, USB mouse, keyboard, U-disk
 
ARM9 S3C2440 Micro2440SDK+3.5" TFT TouchScreen LCD Micro2440Core Board Content List:
1. Micro2440SDK ARM9 Kit and S3C2440 Core Board (Preload with Linux)
2. 3.5" TFT TouchScreen LCD 
3. 1 Serial cable
4. 1 Net cable
5. 1 USB cable
6. 5V Power Adapter 
7. 1 JTAG board(for H-JTAG)
8. DVD Document with Software WinCE , Linux ,Manual