The end of two-stage mill without screendescription:
Currently, more and more gangue, coal cinder brick used to add materials such as, internal fuel; with waste rock, shale production of standard bricks, hollow brick is consistent with national policy, the major initiatives to benefit society. But the crushing of these materials, especially wet materials brick crushing issue has always plagued normal production of a problem.
Second the end of two-stage mill without screen scope:
The end of two-stage mill without screen can be easily crushed and humidity expected gangue, shale, coal and other materials, two-stage crusher. Machine is suitable for crushing coal, shale, slag, the slag, slag and other construction waste materials, mesh size 3mm below the user-friendly gangue, coal cinder brick used for adding material, internal fuel; resolved with waste rock, shale production standard bricks, hollow brick, wall materials, insulation materials, high temperature materials, crushing problems. In metallurgy, cement, refractories, coal, construction industry and other sectors by the majority of users welcomed the ideal grinding equipment.
3 The end of two-stage mill without screenmain technical parameters:
Model
|
SCF600x400 <
|
SCF600x600
|
SCF800x600
|
SCF1000x800
|
Feed size
|
≤ 150 mm
|
≤ 200 mm
|
≤ 260 mm
|
≤ 400 mm
|
Discharge size
|
≤ 3 mm (about 2 mm less than 90%)
|
≤ 3 mm (about 2 mm less than 90%)
|
≤ 3 mm (about 2 mm less than 90%)
|
≤ 3 mm (about 2 mm less than 90%)
|
Capacity
|
10-20 tons / hour
|
20-30 tons / hour
|
40-55 tons / hour
|
60-80 tons / hour
|
Allow moisture content of materials
|
No requirement
|
No requirement
|
No requirement
|
No requirement
|
Motor Power
|
18.5 +18.5 kW -4 level
|
22 +22 kW -4 level
|
45 +45 (37) kW -4 level
|
75 +55 kW -4 level
|
Dimensions
|
2560x1020x1650 (mm)
|
> 2760x1280x1750 (mm)
|
3760x1314x2140 (mm)
|
4500x1700x3150 (mm)
|
4 The end of two-stage mill without screen use and care instructions:
A strict test to check the machine before starting the installation meets requirements of all parts, screw bolt is loose, may try to switch hands with a light face lift, whether touching shells and so on. Also check the direction of rotation, is strictly prohibited smash flammable, explosive materials, to prevent accidents.
2 production should be maintained even under the crush material to ensure quality and normal production, while non-motor overload, in order to ensure normal operation of the machine.
3 In addition to checking the site regularly pay attention to tighten loose, the same time, it should be noted that the wear check wearing parts, such as badly worn should be replaced to avoid damage to the main components. And take the necessary fire prevention measures.
4 As the speed is higher, in addition to install correctly and securely, the same should be kept well lubricated in order to maintain the normal operation of the machine. Under normal circumstances bearing temperature does not exceed 70 degrees as normal. Once a week, plus the host bearing butter, molybdenum disulfide, high-speed butter better.
Notes:
** productivity and physical properties of crushing, feeding method, feed particle size and composition of the relevant conditions.
** For help, please contact :0371-64128277, 64128279, online QQ1326270856
** Xin Fei machine is designed to provide you with better products and the most economical solution
** Our technical experts ready to provide you with technical assistance, and hope to establish long and lasting relationship!