First coal crusher mobile application:
Currently, coal gangue, coal cinder, slag used to add material for brick and internal fuel; with waste rock, shale production of standard bricks, hollow brick is consistent with national policy, an important measure to benefit the society. But the crushing of these materials, especially wet materials brick crushing issue has always plagued normal production of a problem. Mobile hammer mill is equivalent to breaking into one of two reasonable to form a whole, the two sets of rotor thread to use, wear-resistant and durable, economical and practical.
Second coal pulverizer performance characteristics:
1. Rotors up and down 2 smash, cavity material rapid collision with each other, crushing each other, to hammer powder, the effect of powder materials, direct unloading
2. A screen grate bottom, humid material, not blocking, grinding efficiency, there is no hammer invalid abrasion
3. Two-rotor two smash, big output, a 3 mm particle size below 2 mm less than 80%
4. High Alloy Hammer. Hammer used in combination hammer handle, hammer only for not-for-hammer handle
5. Especially the shift technology transfer gap without repairing worn hammer, mobile location repeatedly use a hammer to use the top three hammerhead
6. Pressure electric start case, only one person operation, light fast, easy maintenance
Third mobile coal pulverizer technology parameters:
|
Model
|
SCF600x400
|
SCF600x600
|
SCF800x600
|
SCF1000x800
|
|
Feed size
|
≤ 150 mm
|
≤ 200 mm
|
≤ 260 mm
|
≤ 400 mm
|
|
Discharge size
|
≤ 3 mm (2 mm less than about 90%
|
≤ 3 mm (about 2 mm less than 90%)
|
≤ 3 mm (about 2 mm less than 90%)
|
≤ 3 mm (about 2 mm less than 90%)
|
|
Capacity
|
10-20 tons / hour
|
20-30 tons / hour
|
40-55 tons / hour
|
60-80 tons / hour
|
|
Allow moisture content of materials
|
No requirement
|
No requirement
|
No requirement
|
No requirement
|
|
Motor Power
|
18.5 +18.5 kW -4 level
|
22 +22 kW -4 level
|
45 +45 (37) kW -4 level
|
75 +55 kW -4 level
|
|
Dimensions
|
2560x1020x1650 (mm)
|
2760x1280x1750 (mm)
|
3760x1314x2140 (mm)
|
4500x1700x3150 (mm)
|
Fourth the use of coal pulverizer and care instructions:
A strict test to check the machine before starting the installation meets requirements of all parts, screw bolt is loose, may try to switch hands with a light face lift, whether touching shells and so on. Also check the direction of rotation, is strictly prohibited smash flammable, explosive materials, to prevent accidents.
2 production should be maintained even under the crush material to ensure quality and normal production, while non-motor overload, in order to ensure normal operation of the machine.
3 In addition to checking the site regularly pay attention to tighten loose, the same time, it should be noted that the wear check wearing parts, such as badly worn should be replaced to avoid damage to the main components. And take the necessary fire prevention measures.
4 As the speed is higher, in addition to install correctly and securely, the same should be kept well lubricated in order to maintain the normal operation of the machine. Under normal circumstances bearing temperature does not exceed 70 degrees as normal. Once a week, plus the host bearing butter, molybdenum disulfide, high-speed butter better.
Note: ** productivity and physical properties of crushing, feeding method, feed particle size and composition of the relevant conditions.
** For help, please contact :0371-64128277, 64128279, online QQ1326270856
** Xin Fei machine is designed to provide you with better products and the most economical solution
** Our technical experts ready to provide you with technical assistance, and hope to establish long and lasting relationship!
