First.The main purpose machine tools and structure
1. The main purpose
This applies to the processing of flat glass contour and the surrounding Bevel. By adsorption in the glass vacuum will be on the sucker. Electrical machinery with the CVT-driven rotary dial or on a separate drive wheel of an independent satellite dial rotation so that the rotary aircraft Machinable 100 ~ 2000 mm diameter of the contour of flat glass, Rotation speed dial can be used to regulate speed hand wheel, the machine can use the simple cylinder shape of a semi-automatic contour glass grinding. Grinding Xiebian, installation Wanxing abrasive wheels, gear system to adjust the angle of incline; lateral tilt device can be Normal grinding head tilted to ensure that only the use of abrasive wheels of the side for processing.
2. Structural features
The use of cast iron base, has a good seismic Worm Gear gap adjustable structure to ensure that no gap dial rotation; waterproofing components of the Movement adopted a double waterproof.
Second, the main technical parameters
1. Diameter of rotary glass :100～2000mm㎜
(Note: when grindr thin glass, glass size should not be too large)
2. Glass thickness:3-25mm
3. Bevelling degree:0～15°
Speed dial: 0.5 ~ 2.5 r / min:
4. Disk speed:：1.3～6.5r/min
5. Bevelling abrasive wheels:φ150
6. Abrasive wheels:φ100、φ150、φ175
7. Glass turning dia of bevelling grinding ;φ200～φ2000
Note: The thickness of the glass is less than 5 mm,can not grind this diameter.
8. The biggest bevelling width:35mm
9. Total power:2.5kw
