An overview:
SH28-PTP-SB dust Smoke Tester is a newly developed lightweight, easy-to-use products, and its design of a concentrated expression of the environmental protection experts over the years of the recommendations and practical environmental monitoring department staff feedback, which in the past domestic the old Dust Smoke Tester compared with many distinctive features.
1) hosts its lightweight, compact as the main feature. Dust sampling, flow rate can be based on predictions of principle, but also can be used in parallel Pitot tube sampling method, temperature, pressure, sampling can be conducted at the same time, thus suitable for the monitoring of different sampling habits.
2) discard the past to use a higher failure rate, easily blocked and difficult to repair the scraper pump, with the new high-performance diaphragm pump replaced.
3) regardless of what type of sampling, when the length is 3 to 6 meters can be made special docking can be disposed of, thus causing many to carry and convenient transportation.
4) apparatus installed flowmeter and the whole heating small sampling of available chemical monitoring (SO2, NOx, etc.) industrial emissions.
5) In order to reduce the labor intensity of monitoring, users can order a dozen meters vacuum hose, the entire apparatus is not rising.
6) fx4500 programmable pocket calculator in 1-3 seconds can quickly show isokinetic sampling flow, volume and other standard status monitoring data. Commonly used formulas are stored in the calculator, the user can direct application.
Second, the scope of application:
The main equipment for various coal-fired boilers, industrial furnaces and kilns of dust and smoke emission concentration (mg /) and emissions (kg / h) of the Determination. And the various types of dust purification equipment and the use of purification efficiency. At the same time as the heating apparatus with a good performance of the entire heating of the sample, the higher the moisture content in the flue gas, and various industrial emissions of sulfur dioxide emissions (SO2), nitrogen oxides (NOX), the precise sampling.
Third, the main technical data:
☆ dust flowmeter: 4-40L/min
☆ gas flowmeter range: 0.15 to 1.5L/min
☆ diaphragm vacuum pump features: negative pressure ≥ 0.07 MPa
In the resistance of 0.02 MPa, the flow of ≥ 30 L / min
☆-sampling tube length: 1.0 m (which can be customized according to user requirements)
☆ head of the largest diameter sampling: <50 mm
☆ heating sampling of the entire length: 1.0 m (which can be customized according to user requirements length)
☆ sampling Tsui diameter: 4.5, 6, 7, 8, 10, 12 mm
☆ (LED) sampling timer: 0 ~ 99min 59s, arbitrary
☆ host Size: 350 × 220 × 180 mm
☆ Power: 220V ± 10V% 50Hz
Equipment supporting the directory:
1, a mainframe
2, a diaphragm pump
3, the pressure of a declining number of Taiwan
4, wet and dry ball for a wet test
5, a digital temperature -
6, the entire heating sampling tube (1 m) 1
7, thermocouple (1 m) 1
8, S-Pitot tube (1 m) 1
9, a calculator fx-4500p
10, the sampling tube (1 m) 1
11, heating a sample of the power line
12, the rubber hose Φ10 × 17 (2.5 m) 1
13, the rubber hose Φ6 × 10 (2.5 m) 2
14, mainframe, pumps, heating of a power line
15, the rubber hose Φ10 × 17 (1 m) 2
16, with a leakage protection
17, a 18-absorption bottles, a joint transition
19, silicone rubber tube Φ6 × 10 (0.3 m) 1
# 20,2 cartridge (Φ25 × 90) 20
21, a certificate
22, a box of sampling Tsui
23, a Manual
