Fume sampling of 1 m long, and 1,000 yuan
QL2X3020B6 portable flue gas dust tester is based on national standards HJ/T46-1999 "the potential electrolysis sulphur dioxide detector technology," HJ/T48-1999 "dust sampling technology conditions" and HJ/47-1999 " Gas sampling technology conditions "with the requirements of careful development of the new generation of smart dust communications smoke testing equipment. Is a compact, multifunctional. Mainly used for testing the boiler or furnace Xsm, SO2, NO, NO2, CO, H2S, HF, and other harmful substances and the concentrations of emissions.
Description:
1. Remote maintenance, software upgrades simple
2.200 automatically select group sampled data storage
3. Automatic tracking flue gas velocity isokinetic dust collection
4. Modular architecture design, simple sensor for replacement
5. New patch Process, small size, low failure rate
Group Guolugong 6.20 status data transmission, the scene set-up time reduction
7. Automatic measuring oxygen content, and dry and wet bulb temperature, automatic calculation of water content
8. Large database communications software, which will record each monitoring data archiving for future reference
9. Automatic measurement in flue gas XSW, SO2, NO, NO2, CO concentration and its emissions (optional)
10. DC motor speed control, optional power supply box, without an external power supply and avoid the cumbersome cable drag
11. Gas production company American GAST sampling pumps, vacuum up to 40 KPa load of good
12. Set parameters automatically memory, automatic fault protection, machine parameter calibration software
13. Dust suction back into functional, user password protection, optional parameters Print
14. Blackout in the sampling process, calls automatically restore sampling
Main technical indicators:
Parameters of the resolution error
Sampling flow 5.0 ~ 60.0 L / min 0.1 L / min ≤ ± 2.5%
Flow Control Stability <± 2% (voltage 180 V-250V changes in the resistance to change within 3-6 kPa)
Smoke dynamic pressure of 0 ~ 2000 Pa 1Pa ≤ ± 2%
Smoke +20.00 kPa pressure -20.00 ~ 0.01 kPa ≤ ± 4%
Flowmeter pressure before -20.00 ~ 0.00 kPa 0.01 kPa ≤ ± 2.5%
Flowmeter ago temperature -20.0 ~ 150.0 ℃ 0.1 ℃ ≤ ± 2 ℃
Gas Temperature 0 ~ 300 ℃ 1 ℃ ≤ ± 3 ℃
Dry and wet bulb temperature (optional) 0 to 100 ℃ 0.1 ℃
≤ ± 1 ℃
O2 (optional) 0 ~ 25% 0.1%
SO2 (optional) 0 to 2000 ppm ppm 1
NO (optional) 0 to 1000 ppm ppm 1
NO2 (optional) 0 ~ 200 ppm ppm 1
CO (optional) 0 to 4000 ppm ppm 1
H2S (optional) 0 ~ 200 ppm 0.11 ppm
HF (optional) 0 ~ 500 ppm 0.1ppm
Sampling pump load capacity ≥ 30 L / min (resistance is -20 kPa)
Data storage capacity of 200 group
Maximum sample size 999999.9 L 0.1 L ≤ ± 2.5%
Life O2 sensor in the air 2 years
Sensor life SO2 in the air 2 years
NO sensor life in the air three years
NO2 in the air sensor life 2 years
CO sensor life in the air three years
H2S sensor life 2 years in the air
HF sensor life in the air six months
Dimensions 330 × 160 × 200 mm
Instrument noise <70 dB (A)
The device weighs about 8.0 kg
Power <100 W
Fumes from the sampling:
Parameters
Fume collection efficiency of ≥ 97%
Length of 0.8 m or 1.0 m
Weight 3.5kg
Number 10 cartridge
Supporting oil storage cylinder 10
Maintenance and repair work:
1. Apparatus should be stored in dry, ventilation, sunscreen place.
2. In the use of equipment during the period, after the end of each sample, we must use clean air to the sensor equipment, gas pumps, gas path connecting rubber tube cleaning. Cleaning methods are as follows: End flue gas measurement, in accordance with tips for cleaning equipment; flue gas will be used compressed air sampling tubes, pneumatic rubber tube connected clean.
3. Should be conducted on a regular basis battery charge and discharge, the charge should be a full (for the indicator is not flashing signs), otherwise they will affect battery life. Idle equipment when not in a long time, electricity per month should be a time of not less than 12 hours.
4. Devices integrated electrochemical sensor after the expiration of life, please contact us promptly replaced; we will be good calibration sensor and circuit boards together to your hands, you simply need to open the equipment replacement and adjustment of parameters can be preserved.
