Home > Products > Electronics & Electricity > Electronic Instrument > Test Bench

DESCRIPTION

This equipment is a simple desktop xenon lamp aging chamber, which can be used in various auto interiors, plastics, paint, coating, E-meter, textiles, printing and dyeing, dyestuff, decorative materials, wooden floors, safe hats, leathers, petrochemicals, rubber, ect., which is simulating the artificial aging of sunshine test and light resistance, climate resistance, perspiration&light resistance, ect. By setting radiation energy, temperature, humidity, spray, light alternated with darkness in the test chamber, to provide standard necessary for a simulation of natural environment  and then test the material of property evolution, such as fade, aging, soft, hard, break, etc

FEATURES

1. Exposure method: Up and down adjustable sample tray, three-dimensional space can test 3D specimens;
2.   Light source system：apply imported long arc xenon lamp, high-intensity, 1.8KW professional AC air-cooled xenon arc lamp;
3. Using specialized filter components, and the filtered spectrum fully conform to GB, FZ, AATCC, ISO, JIS, ect.  
4.  Irradiance control: digital setting of light intensity , real-time monitor, self-regulation,meet the stability requirements of different standards for the test light source( can switch to 420nm, 340nm, 300-400nm or 300-800nm single-band monitoring)
5. Temperature control: black-panel thermometer (BPT), black-label thermometer(BST), can switch to air temperature (CHT) and test as the sample at the same station, which truly reflects the test condition of the sample , and tested data is displayed on color screen in the form of numbers,graphs, curves, ect. by CPU . No need to stop observing.
6. Humidification display: the instrument has humidity display value, not controlled.
7.  Data output mode: the apparatus is equipped with a USB port, and the test data can be directly exported to the EXL table file and read on the computer by using the U disk.
8.  Data display mode: 7-inch weinveiw color touch screen display and control, support Chinese and English operation, multiple test monitoring modes(numbers, curves, forms), simply control, intuitive and clear.
9. Standard setting:  custom setting or program setting, AATCC, ISO, GB, JIS and other test standards, which can be permanently saved after setting.
10. Monitoring interface: friendly monitoring interface, running curve

SPECIFICATION

1. Model : HMCX1800B
2. Studio dimension:  320×350×320（D×W×H）㎜
3. External dimension:  580㎜×600㎜×650㎜（D×W×H）
4. Lamp tube power: 1.8KW (air-cooled imported long xenon arc lamp)
5. Lamp tube life: work 1200 hours.
6. Energy control point(indicate that you need to choose one band when ordering): @340nm、@420nm、@300nm～400nm、@280nm～800nm
7. Radiation intensity:（indicate the need for strength control points when ordering）

                           0.25～0.38W/m2@340nm
0.45～0.71W/m2@420nm
20～51W/m2@300～400nm
500～650W/m2@300～800nm

1. Irradiation regulation: build-in sun eye, radiation closed-loop monitoring PID self-regulation.
2. Filter: special glass filter combinations to simulate different environments
3. Black-panel temperature : 38～89℃ (adjustable)
4. Temperature fluctuation: ±2℃
5. Temperature uniformity: ±3℃
6. Humidity display: no humidity
7. Spray system: no spray
8. Sample tray: tablet 290mm×315mm
9. Specimen capacity: test standard finished sample and three-dimensional sample.
10. Dark and light cycle: 0～9999H cycle setting  
11. Imported lamp tube:  1