| Model: | DL-RXC6B |
|---|---|
| Brand: | DreamLNK |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Components / Circuit Board |
| Label: | Switching Control , Learning Code , Receive Module |
| Price: |
-
|
| Min. Order: | 500 pc |
| Live Chat: |  | Last Online:03 Apr, 2024 |
DL-RXC6A / RXC6B is a low cost, small size, high sensitivity wireless receive module, with decoding (learning code) function, and super heterodyne ISM band. It adopts cost-effective wireless data receiving chip and low power consumption single chip, built-in image suppression of RF chip, can support 2.8V-5.5V wide voltage power supply, which performs high receiving sensitivity, as well as good anti-interference performance.
DL-RXC6A / DL-RXC6B are compatible with PT2262 and 1527 encoding. The corresponding decoding and receiving module can also be ODM (customized) according to different remote-control encoding types.
1. Applications
● Multi-channel controller for electric vehicles
● Multi-channel input and output switching control
● Remote control of multi-channel chandelier and lighting
● Wireless multi-channel opening and closing controller
● Standard 1527 protocol remote control
● Energy control and management
● Multi-level control circuit
● D1-D4 can directly drive Darlington and relay circuits;
● Intelligent buildings
● Multi-channel on-off control of motors
2. Features & Brief Introduction:
● Frequency range: 315MHz, 433.92MHz (special frequency can be customized)
● Sensitivity: Up to -112 dBm
● Power supply voltage input range: 2.8V-5.5V (recommended working voltage 3.3V or 5.0V)
● Latch and non-latching mode selection: Set T1/ T2 decoding, output latch / unlatching
● It can be used to learn PT2260, 2262, 1527 remote controllers with good rate compatibility
● Encoded data transmission rate 2.5K bps (Manchester encoding)
● OOK modulation mode, can work with PT4450, 115H, 113, R25 (2SK3356) and other transmitting circuits
● Module size 28.5 × 12 × 6mm (A version), 28.5 × 12 × 6mm (B version, T type plate)
3. Technical Parameter
|
Parameter |
Symbol |
State |
Reference Value |
Unit |
||
|
Min. |
Typ. |
Max. |
||||
|
Working frequency |
Fc |
|
315，433.92 |
MHz |
||
|
Modulation Mode |
|
ASK |
|
|||
|
Receiving sensitivity |
|
50 ohm antenna direct input /1k Kbps |
-112 |
dBm |
||
|
RF Receive bandwidth |
|
300 |
KHz |
|||
|
Data demodulation bandwidth |
|
Demodulation pulse width is 0.2-1ms |
1 |
2.5 |
|
K |
|
System Start-up time |
Ton |
|
|
|
|
ms |
|
Supply Voltage |
VDD |
|
2.8 |
3.3 or 5.0 |
5.5 |
V |
|
Working Current |
IRC |
VDD=3.3V/315M |
|
3.9 |
|
mA |
|
|
VDD=3.3V/433M |
6 |
mA |
|||
|
Logic Truth Table |
T1 |
T2 |
State description |
|
M Flash mode |
High level (floating) |
High level (floating) |
The two setting ports of T1 and T2 are floating, and no level is connected. |
|
L Self-locking mode |
High level (floating) |
Low level (grounding) |
D0-D3 independent output latch state, flipping when valid signal detected |
|
H Interlocking mode |
Low level (grounding) |
High level (floating) |
D0-D3 interlock output, the current signal output remains unique |
|
Reserved mode |
Low level (grounding) |
Low level (grounding) |
Other function modes can be customized (not used yet) |
Note: To confirm that the setting is valid, the red DK tool board needs to be powered on and reset, every time after setting the T1 and T2 states
Shenzhen DreamLNK Technology Co., Ltd. (referred to as“DreamLNK”) is a professional high-tech enterprise specializing in ISM band micro-power wireless communication technology. We have a professional R&D team with abundant working experience; can provide you various RF modules and one-stop intelligent IOT solution!
