| Model: | Relaytest 6000C |
|---|---|
| Brand: | HAOMAI |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Electronic Measurment Apparatus |
| Label: | Relay Protection Tes , Relay Test Set , Relay tester |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:05 Feb, 2015 |
——Automatic system for substation based on the network communication platform
IIEC 61850 is the only international standard of automatic system for substation based on the network communication platform, which makes it possible to share the information and operation between different intelligent electric equipments. As an optical digital relay protection tester that completely meets the IEC 61850 standard, RTS6000C provides a whole testing project for relay protection and automatic device based on this standard.
Technical Featuresl 16 Pairs of Optical Transceivers and 1 Electric Port Providing various kinds of effective coding and decoding for the standard of IEC 61580 (IEC 61580-9-1, IEC 61580-9-2, information of GOOSE.
l MU Test Mode 12 channels for FT3 sending and 2 for receiving, which provides sampling packets for FT3 and FT3-LE of IEC 60044-7/8
l Function of Network Analyzer Grabbing the data packet of IEC 61850 or FT3, displaying and recording the waveform, and simulating the frame loss and gibberish during the output.
l Function of RCA OUT: 12 phases of analogue small-signal output are available for test of equipment protection for AUX IN
l Output Waveform Visibility Displaying the output waveform of local or external equipments and saving the digital recording, which is a real close-loop test system.
l Completely analysis the SCL file (SCD,ICD,CID) Achieving the auto-configuration with the information of SV and GOOSE
l Available for IRIG-B or IEEE1588 in the way of clock synchronization
l Optical Digital Signal Test Available for simulating the packet loss, gibberish and SMV data corruption; providing the Strom test of GOOSE
l Build-in GPS Directly controlled by build-in GPS module; test for double-ends clock synchronization; test for optical fiber differential protection, etc
Technical ParameterslEthernet Communication Interfaces
|
Ø Model |
Ø 10/100Base-TX(10/100Mbit, twisted-pair, automatic interaction) |
|
Ø Port number |
Ø 2 |
|
Ø Interface type |
Ø RJ45 |
|
Ø Status indication |
Ø LED (green lights): Effective connection Ø LED (yellow flickers): Data exchanging |
l Optical Fiber Communication Interface
|
Ø Model |
Ø 100Base-FX（100Mbit, optical fiber, full duplex） |
|
Ø Port number |
Ø 16 groups |
|
Ø Interface type |
Ø ST |
|
Ø Fiber model |
Ø 62.5/125μm（multi-mode fiber） |
|
Ø Wavelength |
Ø 1300nm |
|
Ø Status indication |
Ø LED (green lights): Effective connection Ø LED (yellow flickers): Data exchanging |
l FT3 Interface
|
Ø Port number |
Ø 14 ( 12 for sending, 2 for receiving) |
|
Ø Interface type |
Ø ST |
|
Ø Fiber model |
Ø 62.5/125μm（multi-mode fiber） |
|
Ø Wavelength |
Ø 1300nm |
l Analogue Small Signal Output
|
Ø Output channel |
Ø 12 |
|
Ø Range |
Ø AC: 0~7V rms |
|
Ø Accuracy |
Ø ＜0.1% |
l Digital Input
|
Ø Number |
Ø 10 |
|
Ø Input characteristic |
Ø Adaptive for charged or free contact |
l Digital Input
|
Ø Number |
Ø 4 |
|
Ø Break capacity |
Ø AC 250V/0.2A DC 250V/0.5A |
|
Ø Power supply |
Ø AC220V±10% 50Hz |
|
Ø Dimensions |
Ø 378 mm×260 mm×100 mm |
