Home > Products > Transportation > Car Accessories > Auto Repair Tools

Super BMW AD 4 In 1 Interface

Part No.: MF 009

Super BMW AD Interface support both the K line and the CAN BUS system. It is a 4-in-1

interface, which can work for BMW INPA k + can, BMW scanner 1.4.0, BMW DASH 2.02, and

Hitag2 Programmer.

Super BMW AD 4 In 1 Interface= BMW INPA k + can+ BMW scanner 1.4.0+BMW DASH

2.02+Hitag2 v3.1

Features:

1) BMW AD have the HITAG 2 features, it is V3.1 Very easy you can program key or

transponder to BMW vehicles equipped with CAS module. Programming key is required to

have read eeprom of immobilizer, to load into the software to specify what position

you want to program this key or transponder, and then modify the eeprom dump and

program it into the immobilizer. Also you can read and program internal key memory

where are stored ODOMETER, VIN.

2) Super BMW AD Interface support both the K line and the CAN BUS system. It is an 4

-in-1 interface, which can work for BMW INPA K+CAN, BMW scanner 1.4.0, BMW DASH 2.02,

and Hitag2 Programmer.

Supported Models:

1. Series: E81/E82/E87/E88
3 Series: E30/E36/E46/E90/E91/E92/E93
5 Series: E28/E34/E39/E60/E61
6 Series: E24/E63/E64
7 Series: E23/E32/E38/E65
8 Series: E31
X Series: X3-E83, X5-E53, X5-E70, X5-E71
Z Series: Z1-E30, Z3-E36, Z4-E85/E86, Z5-E52

MINI Series: MINI-R50/R52/R53/R55/R56/R57

Supported Systems:

All systems of BMW series and OBD-II diagnostic system, including:
Engine system
Auto Transmission
SRS
ABS
Cruise system
Air-condition system
EWS
LKE
BUS etc.