| Model: | FS-GSM-L10 |
|---|---|
| Brand: | fosen |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Remote Control |
| Label: | rgb light control , led controller , ir rgb controller |
| Price: |
US $6.5
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: |  | Last Online:25 Apr, 2012 |
Technical Parameters
1. Working temperature:20-60 °C
2. Supply voltage: DC12V
3. Output: 9 channels
4. Connecting mode:common anode
5. External dimension:L70mm*W45mm*H30mm
6. Packing dimension:L94mm*W64mm*H62mm
7. Net weight: 77 g
8. Gross weight: 115g
9. Max output current: 9*0.5 A
10. Max output power: 54W
Direction for use
1. Connect the load wires at first, following by the power wires; Please ensure that short circuit can
not occur between connecting wires before you turn on the power
2. In order to receive the infrared control signal normally, it is necessary to ensure that there is
no barrier between the remote control and infrared detector.
3. The key-press functions are shown below:
Number 1 to 9: program choosing button; corresponding to program 1 to program 9
Rapide: speed change button, up direction
Slow: speed change button, down direction
Reset: the program back to the program 1; low speed, red color, the highest brightness
ON: open the output
OFF: close the output
Left: move to the left
Right: move to the right
4. Under the program 1, 2, 3, 4, 5, users can use 7 color buttons: green, blue, red, cyan, white, purple, yellow on the
left side of IR remote panel;Under the program 1, 2, 5, 7, 8, 9, users can use the button ‘Left’ and ‘Right’ to
change the move direction.
5. Standard changes as the following form (‘Yes’ and ’No’ indicate that the corresponding items can be changed or not ):
|
Program |
Pattern |
speed |
brightness |
color |
move direction |
|
1 |
Single color flow form |
Yes |
Yes |
Yes |
Yes |
|
2 |
Single color fade in and fade out, flow form |
Yes |
No |
Yes |
Yes |
|
3 |
Single color fade in and fade out, in whole |
Yes |
No |
Yes |
No |
|
4 |
Static color |
No |
Yes |
Yes |
No |
|
5 |
Single color stroboflash, flow form |
Yes |
Yes |
Yes |
Yes |
|
6 |
Seven-color jumpy change |
Yes |
Yes |
No |
No |
|
7 |
Seven-color chase change |
Yes |
Yes |
No |
Yes |
|
8 |
Three base color chase change |
Yes |
Yes |
No |
Yes |
|
9 |
Seven-color flow form |
Yes |
Yes |
No |
Yes |
Attentions:
1. Supply voltage of this product is DC12V; never connect to other sizes of Voltages;
2. Never connect two wires directly in case of short circuit;
3.Load wires should be connected correctly according to the connecting diagram offers;
4. Don't peel off the label on the controller in case any indication of information will be missed;
5. Warranty of this product is one year. In this period, we guarantee replacement or repairing with no charge,
but exclude the artificial situation of damaged or overload working.
