The casting dead head separator produced by Harbin Taifu Automation Equipment Co., Ltd., commonly known as hydraulic cutter and casting head remover, is a dedicated tool used for the casting gate, the dead head, and the side gate. It has strong breaking force and is small, light and easy for operation, so it is applicable for long-time and efficient operation. The hydraulic elements all adopt the internationally well-known brands, so the reliability can be guaranteed while the high costs in maintenance and the long cycle of spare parts can be solved. It is adopted by auto parts manufacturers, such as accessories of Volkswagen, Guangzhou HONDA, accessories of Mazda, accessories of SINOTRUK, engineering bridges, accessories and pipes of Dongfeng, achieving good reputation widely.
The casting dead head separator is used for grey cast iron, nodular cast iron and aluminum cast iron. The material of grey cast iron is more fragile than that of the nodular cast iron, so the hammer is commonly used to break the casting gate. But the casting is likely to be damaged with the hammer to beat the dead head, or the conveying equipment may also be damaged by mistake, so such operation is backward. The nodular cast iron is stick and the material is strong in features, so to break with hammer may be ineffective and the intensity involved in the labor will also be heavy. Therefore, using the casting dead head separator will improve the work efficiency and the rate of finished products so as to reduce the labor intensity of the operators. It is easy to operate with fewer requirements in maintenance and lower costs, so the casting enterprises will save costs and achieve more interests.
Under the condition that the casting dead head separator is not damaged, the casting head and runner as well as other spare parts can be separated. It is commonly used for grey cast iron (FC), nodular cast iron (FCD), alloy cast iron, cast steel (mild steel, high manganese steel etc.) and the operation will be easy. The high noise, the quantity of work, and the risks caused by beat of the hammer have been solved and the fragment and dust as well as the high time-consumption are also eliminated. So the work to remove the dead head has become easy, safe, environment friendly, energy saving and can be completed with one key.
Its features are as follows:
1. Kinds of models able to meet the choices of different break forces
2. Wide opening and easy for cutting of the inner gate. The hidden damage can be eliminated and the rate of finished products can be improved.
3. The oil pipes are concentrated so the operation will be easy.
4. Tumbler sliding rail and balancer are also equipped to make the operation easy.
5. It is easy to replace the consumable items.
6. Without damaging the products, the casting gate, dead head and side gate are cut (the head without edge shall be adjusted)
7. According to the usage, the binding clip can be replaced. The jaws have the standard type and the multistep type (type of the jaw), and the jaw with steps will not slide. To facilitate the operation, the binding clip can be rotated, so the operator can remove the dead head without moving and the jaw can return to the original position automatically.
8. Safe, no vibration, no noise, no dust, high performance, efficient, high quality and constant operation
9. Light design can make the operation easy. So operators can work immediately without specific training. And the equipment is easy to be moved.
10. The working efficiency is enhanced and the labor is lowed, which is a powerful guarantee for the casting enterprises to save costs and increase interests.
High quality products, good service and equipments with high cost performance will be your ideal choice！
