LREC7210PF-SFP intel 82545EB PCI 1000M gigabit ethernet SFP PCI lan Card NIC
Descriptions:
Alleviate bottlenecks and increase uptime with Gigabit performance for servers in single- and multi-mode fiber-optic networks.The Intel® PRO/1000 MF Server Adapter,with a self-configuring PCI/PCI-X interface, delivers high throughput while conserving CPU resources. Enhance server performance further by teaming multiple Intel® PRO Server Adapters with Intel’s advanced server feature software for multi-Gigabit scalability and redundant failover capability.
32 bit fiber PCI lan card
Auto-negotiation, Full-duplex Capable
Plug and Play Specification Support
Multi-Gigabit scalability and increased uptime through advanced server features
Optional low-profile bracket included for high density, rack-mounted servers
1.Intel Gigabit PCI Fiber NIC PCI Lan Card
2.SFP Port Intel NIC pci lan card
3.1 year warranty Intel NIC PCI lan card
4.hot sales PCI Intel lan card NIC
|
Features
|
Benefits
|
|
Support for most NOSs
|
Enables widespread deployment
|
|
Supports 64- or 32-bit PCI-X 1.0 or PCI 2.2 buses
|
This flexible, auto-sensing adapter works in a variety of bus types
|
|
Backward Compatibility with previous generations of Intel PRO/1000 Network Adapters
|
Reduces support costs and simplifies installation and maintenance
|
|
IEEE 802.3z Compatibility
|
Supports Gigabit Ethernet industry-wide networking standard
|
|
Full-height and low profile, screw-on brackets included with each adapter
|
Compatible with full-height and low-profile PCI slots—the standard, full-height bracket can be easily swapped out and replaced by the shorter, low-profile bracket, for installation in high-density 1U and 2U servers that feature low-profile PCI slots
|
|
Interrupt Moderation
|
Delivers increased performance while significantly reducing CPU utilization
|
|
Large Send Off-load/TCP Segmentation Off-load
|
Compatible with Large Send Off-load feature of Microsoft Windows* Server 2003, 2000 and XP which enables wire speed performance with low CPU utilization
|
|
LC Connectors
|
This new, smaller connector design is compatible with the latest fiber-optic cabling standards
|
Specifications:
|
Connectors
|
LC Multi Fiber Optic
|
|
IEEE Standard/Network Topology
|
1000BASE-LX
|
|
Wiring
|
multi-mode/62.5um or 50um
|
|
Data Rate Supported per Port
|
1,000 Mbps
|
|
Bus Type
|
PCI
|
|
Length x Width
|
16.5cm x 6.4cm (6.6" x 2.5")
|
|
NOS SOFTWARE SUPPORT
|
Microsoft Windows Server 2003/2000
Microsoft Windows XP 32/64-bit Editions
Microsoft Windows NT 4.0
Linux* 2.4.x or later (32/64-bit)
FreeBSD 4.x or later
Novell Netware 4.11, 4.2, 5.0, 5.1, 6.0
SunSoft Solaris 7, 8
UnixWare 7.x, OpenUNIX 8 (ddi8) SCO5
|
|
ADVANCED SOFTWARE FEATURES
|
Adapter Fault Tolerance
Switch Fault Tolerance
Adaptive Load Balancing
Receive Load Balancing
Gigabit EtherChannel
IEEE 802.3ad (Link Aggregation Control Protocol)
Test Switch Configuration
PCI Hot Plug and Active PCI
802.1Q VLANs
802.3x Flow Control
TCP Checksum Offload
IEEE 802.1p
TCP Segmentation/Large Send Offload
Interrupt Moderation
Save and Restore
|
|
NETWORK MANAGEMENT
|
Wired for Management (WfM) Baseline v2.0 Enabled for Servers
DMI 2.0 Support, WMI & SNMP-manageable
Offline Diagnostics
Intel Boot Agent
ACPI Power Management
PXE 2.0
|
