plasticizer ---epoxy fatty acid methyl ester NO.2
Epoxy Fatty Acid Methyl Ester 2
Molecular Formula: C19H36O3
Physicochemical Properties：It is a kind of light yellow and transparent liquid, and is soluble in most organic solvent.
Application: Aiming at the higher flash point requirements of the midlle/high-level PVC products, such as PVC foaming artificial leather, clothing leather and electric wire,cable, etc., we have devoloped Epoxy Fatty Acid Methyl Ester 2, which has the higher flash point and high epoxy value.
1. High flash point: The flash point has reached 190 to 195 degrees, which is the best quality among the same products in China. The higher flash point, the less to evaporate, which can avoid the explosion and combustion in the foming tank during the PVC production process.
2. High Epoxy Value: The higher epoxy value, the less the epoxy value will reduce, which can not affect the plasticization effect with high temperature . Meanwhile, it can increase the displacing portions and reduce the production cost of the PVC products.
3. No odor: Our product has no odor, which guarantees that the finished products have no odor and there is not inoffensive odor in the workshop duing rolling film and foaming production.
4. Environmental-protection: Our product is made of natural vegetable oil, which has the good enviromental-protection property and meets the environmental-protection requirements of EU.
5. With good compatibility, low vaporization and good stability to the light and heat, it can reduce the use quantity of stabilizer.
Molecular Formula :C19H36O3
Physicochemical Properties：It is a kind of colorless transparent liquid and can be soluble in most of organic solvent .
Application::It is mainly used to produce high-quality PVC products ,such as children toys ,perfusion tube , disposable PVC glove 、refreigerator seal and food package film ,etc . As a nontoxic and environmental-protection plasticzer ,it could replace tributyl citrate(TBC) and dioctyl terephthalate ( DOTP)
Product Features :
1. Environmental-protection and nontoxic : the product is made of 100% natural plant oil , and has passed SGS test and fully achieved the environmental-friendly requirement of EU ,Now it has been widely used to the platics toys which be exported to EU
2. Color:the color of APHA reaches at 35 , accordance with the color of DOTP , and the product could be used to produce any kinds of transparent PVC products .
3. Epoxy value : Epoxy value is the highest among the similar products in domestic,It can increase the subsitution quantity to reduce the cost of the PVC products .
4. No odor :Through our dedicated research and development in recent years ,it has been no smell which helps to improve the quality of PVC products.
5. It can make the color of PVC product be more vivid ,hand-touch be softer and the effect of cold/ heat-resistant be more significatn by using Epoxy fatty acid methyl ester No.1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here
China Suppliers Quick Searching: