2. L2 Manager Fiber Switch for FTTx CPE Application
3. Smart Link for Fiber Speed Selection
4port 10/100/1000Base-T Green Gigabit Ethernet IP Manager Fiber Switch
The MLS-1O4G Series Provides three advantages and integration to an stand-alone opticalfiber Network Manager switch for 4 x 10/100/1000Base-T. This Fiber Manager Switch with its idea functions Smart Link ability of selecting either 100Base-FX or 1000Base-X on the fiber port, using the SFP module. With this converter the FTTx networks can grow from today’s need of 100Mbps to tomorrow’s need of 1Gbps – without the need of physically upgrading the converter. Simply exchange the 100 Mbps SFP in the access node switch with a 1Gbps SFP (the access node switch must of course support Gbps speed). The converter will then automatically select the higher speed – and you now have a full featured Gbps network all the way to the end-user.
*Power Saving Up to 60%.
*Layer II feature for IP remote manager meet the FTTx application.
*Smart Link converter that supports both 100Mbps and 1Gbps on the fiber port for using SFP module.
*Operates in store and forward mode.
*MDI/MDIX auto-crossover for TP ports.
*Auto-negotiation (10/100/1000 Mb/s) for TP ports.
*Maximum packet size: 9216 Bytes.
*Support TP port RJ45 Cable Diagnostic function and get Cable Length/Status.
l SupportsFull,Halfduplex,10/100/1000speedAutomodeselections (1000M only support Full duplex mode).
l Transmission Packet Rate for 10/100Base-TX: 14880/148800 per second ; 1000Base-T: 1488000 per second
l Copper TP cable4pairCat.5eor6UTP
l Transceivertype： SFP type socket
l Supports 155 Mbps and 1.25 Gbpsfor multi-rate speed
l Operate in store and forward mode
l Support IEEE802.3 10BASE-TX
l Support IEEE802.3u 100BASE-TX
l Support IEEE802.3ab 1000BASE-T
l Support IEEE802.3x 100BASE-FX(100Mbps)
l Support IEEE802.3z 1000BASE-FX(1000Mbps)
l Support 8K MAC address
l Support Auto MDI / MDIX
l Support 9K Jumbo Frame
l Support TP Port Auto-negotiation(10/100/1000 Base and Full/ Half mode)
l Support Fx Port Auto-negotiation(100/1000 Base-FX ,Full duplex mode Only)
l Temperature: 0 - 50℃ (Operating); 0 - 70℃ (Storage).
l Humidity: 20-80% non-condensing (Operating); 10-90% (Storage).
l Power: DC Jack : Switching adaptor (12V, 0.5A);Powerconsumption: < 5W
l Dimensions: 155mm(W) x 83mm(D) x 30mm (H).
l Weight: TBD
l Compliance: FCC part15 Class B, CE Mark
l MTBF: 65,000 h (25℃)
Layer II Manger Switch feature Description：
l Support Web SNMP Manager feature
l Support 802.1Q/QoS priority/ port setting
l Support Q in Q double VLAN tagging
l Support IGMP v1/v2 snooping
l Support Port Trunk setting
l Support LAN Loop Prevention
l Support Port Mirroring
l Support port rate limiting from 8K to 1Gbps (step 8K base for Ingress/Egress per port)
l Support 9216 Jumbo Frame
l Support Green Ethernet
l Support 802.3az EEE function
l Support Auto Provision
l Support Port Statistics Monitor
l Support Port Cable Diagnostic
l Support Firmware Upgrade and configuration backup
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content. To report fraudulent or illegal content, please click here.