Home > Products > Home Supplies > Personal Care Appliance

far infrared heated massage insole with tourmaline,infrared heated warm shoe insole,approved CE.FIR heated warm shoe insole.Infrared heated warm insoles.
HSP-75.ANPAN

FIR infrared shoe insole is a new type of practical products that can be widely used in cold areas ,bringing care to you a foot ,With rechargeable Lithium batteries,it can be applied conveniently.Please read the following instruction carefully before using:

I.System Composition

1.Two Li-on batteries(LBP-742D)

2.Battery charger with split head (CE approved)

3.A pair of insoles with heating element inside

4.A pair of calf wraps to fix the insoles.

II.Technical Data

1.Charger input voltage:AC 100-240V,50/60HZ

2.Li-on battery pack voltage:8.2-8.4V/1900mAh

3.Heated insoles input power:7 W(MAX)

III.Battery charging

1.The charger can charge one or two Li-on batteries at the same time with the split head,When the battery is being charged ,the indication light will shine red ,When the battery has charged full.it wil shine green.

2.When the battery is being charged ,when the LED is red ,when the LED  is green,the battery is full

3.Before using the insoles.please charge the battery full and that will take you around 3-10hours

IIII.Installation steps:

1.Check the parts and cut the insoles to fit the size of your feet ,Be careul not to cut the wire or the heating elemtnet inside the heating zone,Then put the heating mat into your shoes

2.Fix the battery with the clip onto the surface of the shoes or fit it onto the wrap around your calf

3.Insert the DC plug on the insoles into the DC socket on the battery ,then press the"ON/OFF"key to start the power (high level)the output max 90% the led is red;again pressthe"ON.OFF)key ,(low level)the output is close.,the LEDis off

4.when working at high level,the battery can work for 3hours ,when working at low level,.the battery can work for 10hours.

 certification