Home > Products > Industrial Supplies > Electrical & Electronic Product Equipment

The line is mainly used for refrigerator&freezer door foaming. It consists of driving unit, curing oven, ground rail, heating and ventilation system, carrier, foaming fixture, injection area exhausting system, earthed system, injection manipulator, pneumatic system, mould locking devices, guide rail for mould open and close movement, hydraulic system, electrical control system. The previous conveyor line, working table for post treatment and high pressure foaming system will be provided by the buyer. The line adopts circular layout, which is driven by hydraulic moto(or motor reducer) and heated by steam or mould temp.

Working procedures: loading manually, closing fixture by guide rail, injection manually, heating and curing, unlocking automatically, opening fixture by guide rail, unloading manually and bubble clearing.

Out Dimension: ~3800X7500X5000mm(LXWH)

Stations:20-30

Fixture Size: 2000X900mm(LXW)

Mould close height:  200mm (Designed according to client’s requirements)

Cycle time:  20s ~30s(not including manual operation time)

Heating mode:  steam or oil temp controller

Foaming agent:  POL+ISO

Injection mode:   open & vertical injection manually

Steam capacity:  200M³/h 

Steam temp:  120~150°C

Compressed air capacity:  1/2 (0.5Mpa) air consumption 0.1M 3/Min 

Power supply:  steam: 75Kw(3890V,50Hz)  Mould temp controller: 235Kw