Home > Products > Electronics & Electricity > Switch > Other Switches

Function:

1.       vibration detecting

Applications

1.      Security devices

2.      toys

3.      Electronic scales

4.      Shoe lights,garment lamp

Features:

1.       SW-18015P seriesare spring type, no directional vibration sensor trigger switch, any Angle can trigger

2.       switch is  off, when it is static, when external force to touch and corresponding vibration, or movement speed achieve adequate (partial) centrifugal force, conductive pick feet will produce instant conductivity is instant on-state, when external force disappear, switch back to off-state.

3.       switch have the identification P at the bottom, for completely airtight;

4.       in the normal,switch life can reach20,0000 cycles lifespan

5.       trigger high sensitivity

6.       apply to Security devicestoyselectronic scalesproducts

Electrical characteristics:

Voltage: <12V

Current: <20mA

Conductive time: 2ms

Closed resistance: <30 ohm

Open resistance: >10M ohm

Mechanical characteristics:

Temperature range: Operating: -40to 80°C, Storage: -40 to 80°C

Pull force of terminal: 500gf for 1 minute

Operating lifespan: 100,000 cycles

Humidity: 95% RH, 40°C for 96 hours

Bill of material:

    Tube: ABS777D

Guide pin: brass tube, gold-plated

Spring: Stainless steel / Phosphorus copper wire

Sealing glue: Epoxy resin

Heat shrinkable tube: PET, black/gray

Welding characteristics

   Solder tin, tin content 100%

   Welding humidity: 260°C ±10°C

   Welding time: 2-2.5 seconds

Do not use strong acid alkali flux

Packaging: 1000PCS (PVC plastic)

Note

1.      If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details

2.      In case of fire, Please do not overload applicable,

3.      The welding temperature or time more than standard, can cause switch collapse

4.      Do not use water solubility flux. May cause damage to the switch

5.      Do not use solvent wash switch

6.      This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)