Home > Products > Industrial Supplies > Machinery > Hydraulic Pressure Machine & Parts

A: Roll forming main machine
1: Coil width: 740mm effective width: 506mm
2: Working speed: 10m-15m/min (not contain cutting)
3: Roll station: 18stations
4: Material of roller: Gcr15 forge steel, polished and coated with chrome
5: Material of main shaft: 40Cr forge steel diameter roller: 100mm
6: Main power: 37kw
7: Forming thickness: 2mm-4mm
8: Transmission: Gear box and cardan shaft
9: Weight: About 15000Kgs
10: Structure of frame: H beam steel plate
11: Cutting:
(1) Cutting type: Adopt hydraulic cutting
(2) Cutting after forming: Cut the sheet after roll forming to required length
(3) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(4) Material of blade: CR12with heat treatment 58-62
(5) Length measuring: Automatic length measuring
(6) Tolerance of length: +/- 1.5mm

B. 10T manual decoiler
Width of feeding: 1300mm
Capability: 10Ton
Range of expand &fight: 450mm_550mm
Mode of expand: Hydraulic Inner expand

C: Control panel Panasonic
(1) Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will Details of each composition
A: Roll forming main machine
1: Coil width: 740mm effective width: 506mm
2: Working speed: 10m-15m/min (not contain cutting)
3: Roll station: 18stations
4: Material of roller: Gcr15 forge steel, polished and coated with chrome
5: Material of main shaft: 40Cr forge steel diameter roller: 100mm
6: Main power: 37kw
7: Forming thickness: 2mm-4mm
8: Transmission: Gear box and cardan shaft
9: Weight: About 15000Kgs
10: Structure of frame: H beam steel plate
11: Cutting:
(1) Cutting type: Adopt hydraulic cutting
(2) Cutting after forming: Cut the sheet after roll forming to required length
(3) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(4) Material of blade: CR12with heat treatment 58-62
(5) Length measuring: Automatic length measuring
(6) Tolerance of length: +/- 1.5mm

B. 10T manual decoiler
Width of feeding: 1300mm
Capability: 10Ton
Range of expand &fight: 450mm_550mm
Mode of expand: Hydraulic Inner expand

C: Control panel Panasonic
(1) Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5) Length inaccuracy can be amended easily.
(6) Control panel: Button-type switch and touch screen
(7) Unit of length: Millimeter (switched on the control panel)

D: Hydraulic station
1: Hydraulic station power: 5.5kw
2: Hydraulic pressure: 20Mpa

E: Manual out table:
(1)Jointed by 60mm*40mm tube
(2)Size: 1.5m long*0.8mwide*0.6-1mhigh
(3)One out table with two support roller

Character of main structure
Main features and components of the machine
1. Main features
A. The structure is simple and the appearance of the machine is beautiful because we adopt the shape-steel structure and process as a whole after welding. It has the ability of strong loading and stable operation when running the machine.
B. All the components of machine are from brand-famous enterprise so that they ensure the machine normal function very effectively.
C. We adopt the automatic length-fixed forming and cutting to guarantee the length to be precise and the finished product clear without deforming.
D. It is very easy to install the equipment and suitable for producing in the factory.
E. The machine has features of low noise and high efficiency.
Technological process
Decoiling--feeding&guide--Punching--roll forming--cut to length--product.