Product Description
Material Grade |
ISO Grade |
Density(g/cm3)≥ |
Hardness(HRA)≥ |
Bending strength(N/mm3)≥ |
Application |
YT05 |
P05 |
12.5-12.9 |
≥ 92.5 |
≥ 1080 |
Suitable for using in processing of hardened steel and high intension steel. |
YT15 |
P10 |
11-11.7 |
≥ 91 |
≥ 1130 |
Suitable for continuous and discontinuous fine cymbals and coarse and fine enlarge of carbon steel and alloy steel. |
YT14 |
P20 |
11.2-12 |
≥ 90.5 |
≥ 1180 |
Suitable for carbon steel, alloy steel processing, un-smooth section continuous coarse car, discontinuous fine and section coarse cymbals, core hole, coarse enlarge. |
YT5 |
P30 |
12.5-13.2 |
≥ 89.5 |
≥ 1370 |
Suitable for carbon, coarse cutting, half fine cutting and coarse cymbals and drilling when processing unsmooth section discontinuous cutting of carbon steel, alloy steel. |
YW1 |
M10 |
12.6-3.5 |
≥ 91.5 |
≥ 1180 |
Suitable for processing of refractory steel, timang, stainless steel, and common steel and cast iron. |
YW2 |
M20 |
12.4-13.5 |
≥ 90.5 |
≥ 1320 |
Suitable for processing of refractory steel, timang, stainless steel, and common steel and cast iron. |
YW3 |
M10 M29 |
12.7-3.3 |
≥ 92 |
≥ 1270 |
Suitable for half fine processing of alloy steel and high intensive steel; Coarse processing under small impulse force. |
YW4 |
M10 P10 |
12-12.5 |
≥ 92 |
≥ 1230 |
Suitable for fine processing of stainless steel. |
YG6X |
K10 |
14.7-15.1 |
≥ 91 |
≥ 1370 |
Suitable for coast and fine processing of cast iron, ball ink cast iron. |
YG6 |
K20 |
14.6-15 |
≥ 89.5 |
≥ 1420 |
Suitable for continuous cutting and coast car rib and core hole fine enlarge of cast iron and un alloy material. |
YG8 |
K30 |
14.5-14.9 |
≥ 89 |
≥ 1470 |
Suitable for discontinuous cutting and cutting cymbals of cast iron, ball ink cast iron, white iron. |
YG11C |
K40 |
14-14.4 |
≥ 87 |
≥ 1670 |
Suitable for impulse turning charge rock head, drilling middle hard and hardness stone. |
K14 |
K20 |
14.8-15 |
≥ 89.5 |
≥ 1400 |
Suitable for fin processing of cast iron and forged steel. |
YG20 |
K50 |
13.4-13.6 |
≥ 85 |
≥ 2640 |
Suitable for fine processing of cast iron and forged steel. |
KD20 |
K35 |
14.3-14.5 |
≥ 86.5 |
≥ 2450 |
Suitable fine processing of cast iron and forged steel. |
KD14 |
K30 |
14.8-14.9 |
≥ 389.5 |
≥ 2750 |
Suitable fine processing of cast iron and forged steel.
|
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,