Home > Products > Electronics & Electricity > Switch > Other Switches

Summary
The product that auto-on or auto-off the power about various electric equipment;according to set time by user.The control object street light,neon-light ,adventising-light .Produce equipment radio &TV equipment ect,and all need to definite time electric equipment and household electrical.

Performance Indicators

Standard work power:AC/DC 24V

Load:resistance 16A

Power consumption :<14VA

Time control range:1min~168hour

Control 1~3 loop at the same time .8 time switch ,both auto &manual.

Time deviation:<±2sec/day

Enviroment temperature:-10°C~50°C

Relative humidity:<95%

Shape size:120*74*58mm

Weight:about 450g

Operation explanation

1.Adjust the current time

    In "the clock" on the key and then click "school week", "reset", "the school points" adjust the            current time.

    Note: If the show is unclear or does not show, please put the product power, charge for 10 minutes, then enter "reset" .

 2.timing settings

2.1  press "Clock" key to see whether the time display shows the current time with the same. To re-adjust, respectively, "the school week," "school time", "school hours" key, the clock is transferred to the current time;

2.2  Click the "regular" key, bottom left display shows "1 on" word (for the first time on time), then press the "school week", select the operating mode: the same day every day different from other modes. Click the "timing", "school hours" key, enter the open time.

2.3

Press "time" button, bottom left display shows "1 off" words (for the first time closing time). Then "the school week," "school time", "school hours" button, enter the closing time and date;

2.4

Continue to press the "regular" key, followed by the lower left display shows "2 ON", "2 off" ... ... "10 On", "10 off" the words, refer to step 3 to set subsequent switching time;

2.5you do not need to set the day 10 group switches, you must press the "cancel / resume" button will eliminate the extra time in each group, it appears on the display "--:--" pattern; not "00:00" pattern.

3, timing is set up, should be "clock" button, the display shows the current time

4.according to "Manual / Auto" button, the display below the "" symbol transferred to the "automatic" position, this time, when the switch to set the time automatically according to open and close the circuit. If in the course need to temporarily open and close the circuit, you can simply press the "Auto / Manual" key "" symbol transferred to the corresponding "open" or "off" position; 

Display Symbols to Explain