Home > Products > Security & Protection > Surveillance Equipment

Single Video Balun Transceiver, Hum Bar Rejection, Solid Connection
Input output horizontal BNC-M, screw terminal connectors, engineering model, video wave filter, transient and lightning surge protection
400m color, 650m B/W distance
UST102MH Single Channel Tiny Passive Video Transceiver

UST102HP Single Channel Mini Passive Video Transceiver

Features

• Video transmission via UTP CAT5 cable.
• Over 10-20% wire costs saved.
• Full-motion CCTV video at distances up to 2000ft B/W(600m), 1500ft Color (400m)
• Building loop termination common mode coke
• In door using passive video BALUN tranceiver
• Interference rejection and transient protection.
• Horizontal male BNC connector allows connection directly to the camera.
• No power required.
• Up to 3,000ft (1km) with active receiver or hub.
• For more information, please contact with authorized distributors.
  

  
  Specification
   

  Attenuation
  DC to 5 Mhz: 1.5 dB max
  
  Common-mode rejection
  15KHz to 5 Mhz: 60 dB typ
  
  Impedance
  Male BNC 75 ohms
  UTP, Screw Terminals 100 ohms
  
  Wire Type
  Network Wiring: One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) per signal
  Category Type: CAT2 or better
  Impedance: 100 ± 20 ohms
  DC Loop Resistance: 26 ohms max
  Differential Capacitance: 19 pF/ft max
  Wire Length, camera to monitor including coax, 1,000 ft (300 m), can be up to 2000ft max (600m) B/W signal

  Connector Interfaces
  Video: Male BNC connector - Horizontal
  Network Interface: 2 Screw Terminals for UTP pair cable

  Environmental
  Temperature: 0 to +50° C
  Humidity (non-condensing): 0 to 95%
  ESD Susceptibility (200 pf probe) : 20 KV
  
  Mechanical
  Dimensions no excluding Male BNC: 18*22*60mm
  Weight: 20g
  Material: Grey ABS
  Mounting: No needed
  Package: Blister Card