| Products vantages: |
1. If put in boiling water for 48 hours, it is still glue-sticking and non-deformed
|
|
2. Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing
|
|
3. If used abide by the illustrations strictly, it can be reused more than 50 times, thus reducing the cost greatly and avoiding the disadvantages from ( rustily and erosive of iron mould)
|
|
4. Solves the problems of leaking and rough surface during constructing process
|
|
5. Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
|
| 6. Realizing a higher economic profits |
| Conventional data: |
Size: |
1220mm*2440mm &1250mm*2500mm or as your demand |
|
Thickness:
(9--30mm)
|
| 3/8inch(8.5-10.2mm) |
9mm = 37.33sheets/cbm |
| 1/2inch(12-12.7mm) |
12mm = 28sheets/cbm |
| 5/8inch(15-16mm) |
15mm = 22.4sheets/cbm |
| 3/4inch(18-19mm) |
18mm = 18.66sheets/cbm |
| Core: |
poplar,hardwood,combi,pine,etc |
| Glue: |
wbp ,melamine mr, |
| Face/back: |
black/brown/yellow film |
| Grade: |
BB,BB/CC,CC,CC/DD,etc |
| Moisture: |
<12% |
|
Thickness tolerance:
|
(+/-)0.5mm |
equal to and more than 12mm |
| (+/-)0.3mm |
less than 12mm |
|
Physical parameters:
|
density:>550??650G/cbm |
| modulus of rupture: > 30Mpa |
| modulus of elasticity :>6000Mpa |
|
Standards:
|
Goods grading standard for CE,FSC,CARB |
|
Packing:
|
inner |
pallet lined with 0.2mm plastic bag |
| Outer |
pallet is covered by plywood and then steel tape for strength
|
|
Quantity:
|
20'GP |
8 Crates/1012000kgs/21~24cbm |
| 40'GP |
16 Crates/24000kgs/48cbm |
| 40'HQ |
18 Crates/26000~28500kgs/50~59cbm |
|
Delivery time:
|
in 15 days after order confirmed |
|
Term of payment:
|
L/C at sight, T/T 50%+50% |
|
Capacity:
|
3000 Cubic Meter / Month |
Mechanics performance：
1st, moisture content <= 10%
2nd, density 0.75/Above cm3
3rd, wear value <= 0.1g/100r (peaceful rice dregs)
4th, impact intensity: 40kj/M2
5th, elasticity coefficient >= 5000MPa >= 7948MPa;
6th, static tune intensity >= 24MPa >= 75.8MPa
7th, angularity <= 1%
8th, thickness common difference ±0.5mm
9th, thickness expansion rate (72 hours normal temperature water immersion) <= 8%
Merit
1st, weight light: Is suitable for the high-rise construction and the bridge construction.
2nd, width big: The maximum width is 2440×1220mm. The reduced joint quantity, enhances the mold working efficiency.
3rd, does not warp, does not distort, does not crack, the water resistant performance is good, the water boils for 24 hours not to open the rubber; Dynamics performance good, the turnover number of times high, the service life is long.
4th, the drawing of patterns is easy, only is the steel die 1/7.
5th, makes the clear water concrete: Smoothly pours the thing surface to be artistic, subtracts the wall two plastering crafts, but the direct cover decoration, reduces time limit for a project 30%.
6th, anti-corrosive: Does not pollute the concrete surface.
7th, the heat preservation performance is good, is advantageous to the winter construction.
8th, may do changes the tune plane the template.
9th, the construction performance is good. Performance and so on nail, saw, drill hole surpasses the bamboo plywood, the small steel die. May according to construct needs to process Cheng Gezhong the shape the template
|
