Product Description
Product Name: WQ series Pond submersible pump
First, the product description:
1, WQ series Pond submersible pumpis the introduction of foreign advanced technology, based on the combined use of domestic water pump features the successful development of a new generation of pumps, with a remarkable energy saving, anti-wound, non-blocking, auto-installation and auto- control, etc., in the carriage of solid waste particles and long fibers, the unique effect;
2, WQ series Pond submersible pump impeller using a unique structure and a new mechanical seal, can effectively transport and long fiber solids containing media. Compared with the conventional impeller impeller, WQ (QW) submersible sewage pump impeller form a single flow channel, which is similar to a cross-section of the same size pipe with a flow of very good too, together with reasonable cochlear room, making the WQ (QW ) submersible sewage pump with high efficiency, the impeller by the static and dynamic balance test, the pump in operation without vibration;
3, WQ series Pond submersible pump hydraulic performance of advanced, mature product has been tested and the performance indicators to meet the relevant standards, after-market for its unique function, reliable performance, stable quality by the majority of users praise.
Second, product characteristics:
1, with the crowd said anti-clogging design of hydraulic components, greatly improving the dirt through the ability to be effective through the pump five times the fiber diameter material and diameter of the pump diameter of about 50% of the solid particles;
2, the design is reasonable, reasonable auxiliary motor, high efficiency, energy saving effect;
3, series mechanical seal is double sealed, corrosion-resistant material is not hard tungsten carbide, with a durable, wear characteristics, can pump more than 8,000 hours of continuous operation safety;
4, pump compact, small size, easy to move, easy to install, no need to build pumping stations, water can sneak into the work, greatly reducing the project cost;
5, pumping room has a water sensor, when the pump side of the mechanical seal is damaged, apply oil into the chamber, the probe signal occurs, the implementation of protection of the pump;
6, according to customers need to configure automatic security control cabinet, the pump leakage, leakage, overload and over temperature monitoring to ensure safe and reliable pump operation;
7, dual-rail full automatic coupling installation system to pump installation, repair, has brought great convenience, but this may not have access to the sump;
8, the float switch can be based on all the water level changes, automatic pump stop start, no special care;
9, using the lift to ensure the motor is running, but within the set;
10, depending on where the motor can be used outside through the bad water-jacketed cooling system to maintain the pump in the water (dry) state of safe operation;
11, fixed installation and mobile automatic coupling installation free installation of more than two, to meet different usage scenarios.
Third, the product is ideal for:
1, heavily polluted wastewater plant business;
2, residential sewage power plant water stations;
3, hospital, hotel sewage;
4, exploration, mining facilities with machines;
5, the water plant's water supply installations.
Fourth, the pump conditions of use:
1 medium temperature does not exceed 60 degrees, severe 1.0--1.3Kg/dm, PH value 5--9 range;
2, no gravity inside the cooling system pump, motor part of the exposed surface of not more than 1 / 2;
3, under normal circumstances, the pump must be used within the scope of the use of lift, the motor is normal, must be used within the scope of the whole head should be specified when ordering, so that manufacturers manufacturing;
4, during operation, the pump motor current must not exceed the motor rated current.
| Lead Time: | 1-15 days |
| Head: | 15 m |
| Flow: | 6 m3/h |
| Power: | 0.75 Kw |
| |
